Hi,I have a v1.6 250G maxtor just flashed my Bios with x3_3294 v16plus thinking it would see the entire drive which I have C:0.30GB E:1.82GB F:82.16 G:Err what can I do?
Last edited:
X3 bios 3294 G:Err
- Thread starter Falcon54
- Start date
Hi,I have a v1.6 250G maxtor just flashed my Bios with x3_3294 v16plus thinking it would see the entire drive which I have C:0.30GB E:1.82GB F:82.16 G:Err what can I do?
Martin C
VIP Member
Hi
I would check the HDD in your PC - try to partition it there first and see what you get back from there.
Martin
I would check the HDD in your PC - try to partition it there first and see what you get back from there.
Martin
Martin C
VIP Member
I've just re-read this post.
These figures you're quoting look more like space remaining instead of capacity. You didn't actually say if this was a newly formatted drive, so I'll assume it isn't.
With these two assumptions, go with what DJBOOBY said and ensure you've enabled the G drive.
Martin
These figures you're quoting look more like space remaining instead of capacity. You didn't actually say if this was a newly formatted drive, so I'll assume it isn't.
With these two assumptions, go with what DJBOOBY said and ensure you've enabled the G drive.
Martin
Well I do have G: setup. Under Drive partition I get total 233.76GB
E:4.77GB
C:0.49GB
X:0.73GB
Y:0.73GB
Z:0.73GB
F:120.55GB
G:105.76GB
If I look at it under Avalaunch it says G:Err
E:4.77GB
C:0.49GB
X:0.73GB
Y:0.73GB
Z:0.73GB
F:120.55GB
G:105.76GB
If I look at it under Avalaunch it says G:Err
Need to alter the Avalaunch XML:
<mount>
<!--
Specify whether or not to mount drives
If omitted the F:\ drive will be mounted by default
If omitted the G:\ drive will NOT be mounted by default
-->
<F enabled="1"/>
<G enabled="1"/>
</mount>
<mount>
<!--
Specify whether or not to mount drives
If omitted the F:\ drive will be mounted by default
If omitted the G:\ drive will NOT be mounted by default
-->
<F enabled="1"/>
<G enabled="1"/>
</mount>
Martin C
VIP Member
I forgot how spartan people can be with information.
Falcon54 - if you had originally posted the information you included in post#5, you would have gotten your answer a lot quicker.
Always try and give as much info as possible!!!
Martin
Falcon54 - if you had originally posted the information you included in post#5, you would have gotten your answer a lot quicker.
Always try and give as much info as possible!!!
Martin
OK, it looks like I have to wait until XBOX 960 comes out until I get some help here............
set setting in x3 bios F get 137G G get the rest
now go into avalaunch
settings
main options
harddisk tools
scroll down till you hilite G drive: disable
enable it NOW push B TO GO BACK TO STARTUP WINDOW
now reboot
now go into avalaunch
settings
main options
harddisk tools
scroll down till you hilite G drive: disable
enable it NOW push B TO GO BACK TO STARTUP WINDOW
now reboot