X3 bios bootup and Evox dashboard

[deshman]

I bent the pins on the X3, so i didn't install the external switch. I installed the X3 and everything is working fine except when it boots up it goes to the X3 startup screen where you can flash the bios, upgrade/unlock the HD etc. What do i need to do to automatically boot the the evox dashboard?

 

[reddsimpson]

umm, if it says at the top of the screen FlashBIOS then that is not the x3bios you will need to go download it from xbins. To disable x3 autostart it will be in the first menu of ConfigLive, and then just choose disable x3 autostart on boot, after that if you need to get back into the menu then hold down the white btn while pwering up the xbox till you get to the x3bios and then u will be all set.

 

[deshman]

it doesn't boot up to the FlashLoader or anything, it boots up to the x3 bios before it will boot the dashboard. I have to choose the option in the X3 bios to reboot to dashboard. Is there anyway that i can bypass that x3 screen and boot directly to the dashboard?

 

[visiperl]

Go into the X3 Config bios and choose to "customize" the bios. I believe the first option which says something like boot to X3 Config live should be disabled. Right now it is probably set to enabled.

Cheers!
Ken

 

[maglite]

after you have gone into the x3 config bios and disabled boot to x3 config live, how do you get back to the bios options again? I would like to make changes to the x3 bios, but because it does not pop up at startup.. i have no idea how to acces the menu to make changes... yikes

 

[maglite]

lol sorry guys, went down a few post and found the answer to my question. my bad