hey this is my first attempt really at doing this so bare with me iv gone back and double checked my solder points and so far nothing seems to be wrong. Only when i boot into the X3 Flash Bios does the screen act funny. It seems like the screen is jumping kind of. you can not read anything but you can see the picture three times and they are constantly moving. Any i am currently opening the things via HDTV wires. sometimes games come in messed up on these wires if they are not the right settings but still nothing.
X3 Bios screen not focused
- Thread starter bigdazz
- Start date
update
This is a update iv been reading around a new problem it now blinks solid orange and does nothing else. From what i am reading this is overheating issue. Im guessing i had to have made a mistake somewhere on the solder points so im going to check for the third time. I am experianced with soldering and i will check for splashes and what not. Anywho any help would be helpful
This is a update iv been reading around a new problem it now blinks solid orange and does nothing else. From what i am reading this is overheating issue. Im guessing i had to have made a mistake somewhere on the solder points so im going to check for the third time. I am experianced with soldering and i will check for splashes and what not. Anywho any help would be helpful
fixed my problems now just have to flash new bios which are still giving me trouble keeps saying the bin file i am selecting is to big on the xbox screen
Make SURE that you have the right banks selected. There is a sticky thread here that shows which switches select the ones you want. If you are using the X3 Bios you need to select a 1MB bank. (On On Off Off Off= Bank1 and Off On Off Off Off=Bank2)