I have my xbox booting to evox dash I was wondering how to get back into X3 config live if I ever wanted to change something?
X3 Config Live
- Thread starter BigAnt331
- Start date
NEED HELP!!!
Hi guys,
i have a problem i erase my liteon fireware but i creat a Dummy before i erase it, Now the problem is how i get the old firmeware to the liteon drive, my comptuer doesnt show me the drive any more in DVDKey 32.
THX!
excause me for bad english
Hi guys,
i have a problem i erase my liteon fireware but i creat a Dummy before i erase it, Now the problem is how i get the old firmeware to the liteon drive, my comptuer doesnt show me the drive any more in DVDKey 32.
THX!
excause me for bad english
Re: NEED HELP!!!
this is normal, have you read the jungleflasher tutorial?
When you erase the drive, it is void of firmware, therefore JF and your computer can't detect it.
Send the device intro to the correct port, then power cycle the drive. You should see flash properties of 0x72, then write the drive.
this is normal, have you read the jungleflasher tutorial?
When you erase the drive, it is void of firmware, therefore JF and your computer can't detect it.
Send the device intro to the correct port, then power cycle the drive. You should see flash properties of 0x72, then write the drive.
Re: NEED HELP!!!
yes im read it but my pc is frozen but i get the dummy and all the things i show u the images may u can help me than!
1
http://img517.imageshack.us/img517/4279/54102991.jpg
2
http://img692.imageshack.us/img692/7199/22929566.jpg
i cant click on intro
the lite on drive is on an the sata port a the right one -.- but i got only this info if i click on Dummy form KEYDB tant i havent any more Drive Properties
yes im read it but my pc is frozen but i get the dummy and all the things i show u the images may u can help me than!
1
http://img517.imageshack.us/img517/4279/54102991.jpg
2
http://img692.imageshack.us/img692/7199/22929566.jpg
i cant click on intro
the lite on drive is on an the sata port a the right one -.- but i got only this info if i click on Dummy form KEYDB tant i havent any more Drive Properties
Re: NEED HELP!!!
you do not have the correct port selected in the top left corner
you have the port of a harddrive, i believe
select a new port, if drive properties come up, you have the wrong port
if they don't, try pressing intro/device id then power cycling
if your drive shows, flash
if it doesn't show, try another port
once again, you are using the wrong port
find the port you were originally using for the drive
you do not have the correct port selected in the top left corner
you have the port of a harddrive, i believe
select a new port, if drive properties come up, you have the wrong port
if they don't, try pressing intro/device id then power cycling
if your drive shows, flash
if it doesn't show, try another port
once again, you are using the wrong port
find the port you were originally using for the drive