Hey, I configured my X3 bios to the way i like but i want to add thee LCD to my chip in the near future. The problem I ran into is that I disabled the AutoStart Config Live option so that my box boots right to EvolutionX. Can some one tell e how to get back into the bios? Thanks
X3 Config Live
- Thread starter tophfro
- Start date
quick tap the power button to boot with chip enabled and while the flubber is going hold the white button down until config live comes up.
Hope this helps.
Hope this helps.
Windows doesn't recognize my Lite-On?
Ok, so I'm running Windows 7 x64, on an ASUS mobo, and have the drive plugged directly into the SATA port on the mobo, powered by the 360 itself. When the BIOS posts, the drive is recognized correctly, and everything is great, but when I boot into Windows, I can't get it to recognize the drive to save my life. Scanned for hardware changes, tried different SATA ports for drive assignment, nothing. Anyone got any clues as to why?? Thanks for your help!
Edit: It's a Lite-On, that has been previously flashed. I have the OFW still. It originally required HW mods to flash it the first time.
Ok, so I'm running Windows 7 x64, on an ASUS mobo, and have the drive plugged directly into the SATA port on the mobo, powered by the 360 itself. When the BIOS posts, the drive is recognized correctly, and everything is great, but when I boot into Windows, I can't get it to recognize the drive to save my life. Scanned for hardware changes, tried different SATA ports for drive assignment, nothing. Anyone got any clues as to why?? Thanks for your help!
Edit: It's a Lite-On, that has been previously flashed. I have the OFW still. It originally required HW mods to flash it the first time.
Re: Windows doesn't recognize my Lite-On?
Trying to use jungle flasher, but I can't even get that far, since windows to recognize the drive.
Trying to use jungle flasher, but I can't even get that far, since windows to recognize the drive.
Re: Windows doesn't recognize my Lite-On?
The drive won't show up under my computer... It will only show up in jungleflasher... You have to search for the proper port that your drive is on.
The drive won't show up under my computer... It will only show up in jungleflasher... You have to search for the proper port that your drive is on.
Re: Windows doesn't recognize my Lite-On?
What would cause it to not show up in jungle flasher then? I thought that the jungleflasher tutorial said that jf wouldn't recognize the drive if Windows wouldn't. Checked every available slot, and nothing.
What would cause it to not show up in jungle flasher then? I thought that the jungleflasher tutorial said that jf wouldn't recognize the drive if Windows wouldn't. Checked every available slot, and nothing.
Re: Windows doesn't recognize my Lite-On?
Or, let's just pretend that was a rather stupid question, since I forgot to activate the 0800 mode. Now I have another potentially stupid question- it's obviously been awhile since I last flashed my drive, so I can't remember how to exit 0800 now that I'm in it, and I haven't found on answer online yet. Anyone help me out with this one? Thanks
Or, let's just pretend that was a rather stupid question, since I forgot to activate the 0800 mode. Now I have another potentially stupid question- it's obviously been awhile since I last flashed my drive, so I can't remember how to exit 0800 now that I'm in it, and I haven't found on answer online yet. Anyone help me out with this one? Thanks
Re: Windows doesn't recognize my Lite-On?
try reading the jungleflasher tutorial available in the downloads section
it will answer all of your simple questions and help you understand what you are actually doing
try reading the jungleflasher tutorial available in the downloads section
it will answer all of your simple questions and help you understand what you are actually doing
Re: Windows doesn't recognize my Lite-On?
Good god. Just shoot me. the power to the drive came unplugged from the mobo somehow. Of course it wouldn't exit vendor mode. FFS. Case closed, flashed successfully. Thanks for everyones help.
Good god. Just shoot me. the power to the drive came unplugged from the mobo somehow. Of course it wouldn't exit vendor mode. FFS. Case closed, flashed successfully. Thanks for everyones help.