X3 Config wont keep settings

[zBodger]

Hey I have an X3 in a V1 that has 2913 flashed to it - but wont keep any settings in X3 Config (like DHCP and Autostart) I tired flashing 1959 but all I get is error16. Anybody have any ideas.

 

[nartac]

error 16 means your dashboard has a problem ie it could be corrupted. Not sure why you can't save your X3 config. I only would suggest to reflash your bios again.

 

[zBodger]

i did reflash with 2913 - same problem can get to x3 config and then load a dash/etc but cant get it to keep settings.

Also I dont know why the erro16 only came up with 1959 not 2913?

 

[nartac]

you know, I seem to remember something about rechecking your solder on pins 13 and 14 if you have problem with config live not saving.

 

[zBodger]

Seems like this is a growing problem - people over at xbox-scence are having it - no answers .... anybody know whats up?

 

[zBodger]

Seems like this is a growing problem - people over at xbox-scence are having it - no answers .... anybody know whats up? resoldering doesnt seem to solve the problem

 

[loki2043]

ok yeah.. it just happend to me.. i modded 2 xboxs today.. and only one of them saved the settings.. so i busted the box open..seems i missed hole 13 for the wire.... so im gonna have to re solder it tomarrow... hope that clears things up