X3 Control Panel cable pinouts...

[eight_heads]

where can i find a pinout for the two plugs that go to the X3 control panel? i plan on doing an integrated panel with toggle switches for the 4 memory banks either on the side or the back of my case, i also plan on putting a bi-color led in the front of my case to show when the chip is enabled and disabled... i've been looking all over for this... thanks
-eight-

 

[NeOnRaBbIt]

first of all theres alot more than 4 memory banks. theres 5 dip switches, 1 for flash protect on/off and the oter 4 are to select banks. It is not switch 1 = bank 1. Why dont you try and search that or something. Hint, think binary, 4, 15 combinations, :lol: ring any bells?

next, theres already a status led on the switch to show wen enabled/disabled/256k backup. So i dont think you need those pinouts any more huh?

EDIT: Oh ok, re reading your post it seems like you want to make your own custom case. Sorry i dont really know anything about doing that. There arnt any pinouts that have been released oficialy that i know of but maybe someone could find out..

 

[eight_heads]

yes, doing a custom case, and i meant to type 4 switches to control the memory banks, i know there are more than 4 banks... i could just tear the control panel itself apart, but i would rather leave it intact

 

[fannin]

abgx currupted vido partition

when i check my stealth file on abgx everything checks out but the vido partition is there any way to fix this

it reads " video partition does not match known data <could be currupt or a new wave not seen before>

 

[DrDillsill]

Re: abgx currupted vido partition

Here you go

http://www.abgx360.net/download.html

http://www.megaupload.com/?d=P2ZOM6OV

Hope this helps

 

[xmod]

Re: abgx currupted vido partition

Heres a strange one.... I did that downloaded the new file extracted it, closed abgx360, reopened program....but it still says video partition doesn't match error....now I'm confused??

 

[ReMix]

Re: abgx currupted vido partition

Heres a strange one.... I did that downloaded the new file extracted it, closed abgx360, reopened program....but it still says video partition doesn't match error....now I'm confused??

you must not have placed the .exe file in the correct location of abgx

 

[xmod]

Re: abgx currupted vido partition

Okay...all I did was download the wave 5&6 support file to desktop....double clicked it and watched it extract the new files to the folder it finished ...then reopened the abgx program and ran it through again....

Should I have re downloaded the whole abgx program ?

 

[ReMix]

Re: abgx currupted vido partition

you need to place the new .exe into the abgx folder next to the abgx360gui.exe file

inside the program files folder

 

[DrDillsill]

Re: abgx currupted vido partition

Just put the file that you have downloaded into the ABGX Program folder and all should be fine.

Hope this helps