X3 wont enable

[onin2]

Cant get X3 to enable. Stays red. Tried tapping power button.

 

[pvpmc]

you need to make sure all your soldering points are all good I would double check all your soldering. Also what version of xbox is it? if its a 1.6 make sure your LPC rebuild is done properly

 

[NeOnRaBbIt]

also check to see if you put that eject/reset board in correctly (see tut in my sig, one of them is 1.6 and other is <1.6)

 

[KingofNothing]

check to see that the chip is all the way on the pin header...lol i had that problem

 

[onin2]

Thanks I will try tomorrow

 

[qlchin]

Switching Serials

i have two xbox's, one that works but i lost the dvd drive and another that has e74 with the dvd drive

i was wondering if i could swap out the serials so i can have a xbox 360 that is working and if there is a tutorial?

or is it possible if i use a hair dryer fix instead of buying a heat gun fix for the e74? or reflow with the xbox running by itself?

i tried xclamp fix but that only worked for the xboxs that i fix with 3redring

 

[EvilC0rp]

Re: Switching Serials

you need the dummy files of the xbox you lost the drive from so u can spoof the drive with the key of the 360. the other way of getting the key is finding the drive

 

[xmetal]

Re: Switching Serials

i have two xbox's, one that works but i lost the dvd drive and another that has e74 with the dvd drive

i was wondering if i could swap out the serials so i can have a xbox 360 that is working and if there is a tutorial?

or is it possible if i use a hair dryer fix instead of buying a heat gun fix for the e74? or reflow with the xbox running by itself?

i tried xclamp fix but that only worked for the xboxs that i fix with 3redring

using a hair dryer will do nothing im afraid you need to be hitting around 400c to re flow the solder on the chips so a heat gun is a must.