Hi guys, I have a problem:
TX Product(s) used: CR3 Lite programed with Nand-X
Console Type: Corona
NAND size: 4GB
Dashboard version: 16547
CB version: 13182
Screenshot of NAND details from J-Runner: attached
J-Runner log:
updflash.bin log (if applicable):
Image of Coolrunner: attached
Images of close-up soldering to motherboard: attached
Description of problem:
I can't get XeBuild works
XeLL boots fine, get CPUKey and create XeBuild. Flash it.
When I power on the console, the debug light on the CR3lite is shorter than .ecc.
Eventually, after 20 seg-1min, get red light and shut down. It seems at the right moment when the console is going to boot xebuild (for half a sec blink the green leds in the halo front)
When I flash the retail nand, shows up the warning of heating, do you know what i mean?
Another thing, it wasn't necesary to short Y3D1 to GND to R/W the nand
This issue is happening with consoles with MFR: 2013-10
Internal error = 0010
This is a copy of the nand if you want to dig: https://mega.co.nz/#!BxxhVLjA!InbgtYcEfT1U1moLkN0bKWBLlDy0gmsPNc5p279rs-U
Was the console working before you started: Yes, and still working with the retail nand.
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Yes. with .ecc the light blinks fine, but XeBuild is a littler short
How long is the light on for each time: .ecc = 1 seg aprox / XeBuild = half seg, even less.
TX Product(s) used: CR3 Lite programed with Nand-X
Console Type: Corona
NAND size: 4GB
Dashboard version: 16547
CB version: 13182
Screenshot of NAND details from J-Runner: attached
J-Runner log:
Code:
Initializing nanddump1.bin..Corona 4GB
Nand Initialization Finished
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
Code:
Load Files Initiliazation Finished
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to D:\Console Tools\X360 Tools\JTAG-RGH\Exploits\Exploit Generators\J-Runner\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image
---------------------------------------------------------------
D:\Console Tools\X360 Tools\JTAG-RGH\Exploits\Exploit Generators\J-Runner\J-Runner\011946734208\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16547.0
Console : Corona
NAND size : 48MiB MMC (system only)
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 011946734208
ConsoleId : 543590400213
MoboSerial: 9596571110903418
Mfg Date : 10/14/2013
CPU Key : BA0E485DAE4AECD5904306DBDB290EDE
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 4F9BC8BB09C0C7EC433F754B39B2F3E8
CF LDV : 2
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to D:\Console Tools\X360 Tools\JTAG-RGH\Exploits\Exploit Generators\J-Runner\J-Runner\011946734208
Image is Ready
Initializing updflash.bin..
Corona 4GB
Nand Initialization FinishedImages of close-up soldering to motherboard: attached
Description of problem:
I can't get XeBuild works
XeLL boots fine, get CPUKey and create XeBuild. Flash it.
When I power on the console, the debug light on the CR3lite is shorter than .ecc.
Eventually, after 20 seg-1min, get red light and shut down. It seems at the right moment when the console is going to boot xebuild (for half a sec blink the green leds in the halo front)
When I flash the retail nand, shows up the warning of heating, do you know what i mean?
Another thing, it wasn't necesary to short Y3D1 to GND to R/W the nand
This issue is happening with consoles with MFR: 2013-10
Internal error = 0010
This is a copy of the nand if you want to dig: https://mega.co.nz/#!BxxhVLjA!InbgtYcEfT1U1moLkN0bKWBLlDy0gmsPNc5p279rs-U
Was the console working before you started: Yes, and still working with the retail nand.
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Yes. with .ecc the light blinks fine, but XeBuild is a littler short
How long is the light on for each time: .ecc = 1 seg aprox / XeBuild = half seg, even less.
Attachments
Last edited:
