RGH X360Run to CR4 Xl but not booting into Xell

G

greatbillo

Junior Member
Nov 29, 2014
11
0
Hi guys It my first ever RGH. My Xbox360 slim was modified by local person but it was creating so much problems it boot up after 4-5 times console restart so i disassembled it and found that he used X360Run chip. i decieded to use Coolrunner so i ordered CR4 XL with QSB V3 and J-R Programmer v2 and Postfix Adapter v2 i have solder all the using method described in http://team-xecuter.com/forums/showthread.php?147840-CR4-XL-SLIM-Corona-v3-v6-Install-Guide-(RGH2-) and to used J-Runner i used a guide http://www.ixtreme.net/jtag-rgh/20078-reset-glitch-hack-guide-using-tx-coolrunner.html i was stucked on step 3. Programming and installing the TX Coolrunner as i was getting error "Xilinx Device ..... [NOT DETECTED]" so i have skiped that and Created and write ECC file but after that i am not able to boot into Xell please advised my what should i So as i am completely Noob in this


20141204_075848.jpg20141129_182819.jpg20141204_075809.jpg20141204_075742.jpg
 
G

greatbillo

Junior Member
Nov 29, 2014
11
0
===================================================
Thursday, December 4, 2014 9:17:07 AM


J-Runner v0.3 Beta (6) Started






Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13121
Corona
Reading Nand to F:\xbox\J-Runner v3 (5) Core Pack_2\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:21 min:sec


Reading Nand to F:\xbox\J-Runner v3 (5) Core Pack_2\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:22 min:sec


Reading Nand to F:\xbox\J-Runner v3 (5) Core Pack_2\J-Runner v3 (5) Core Pack\output\nanddump3.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:21 min:sec


Reading Nand to F:\xbox\J-Runner v3 (5) Core Pack_2\J-Runner v3 (5) Core Pack\output\nanddump4.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:21 min:sec


Comparing...
Nands are the same
Programming Coolrunner
F:\xbox\J-Runner v3 (5) Core Pack_2\common\xsvf\corona.1_3.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]
Programming Coolrunner
F:\xbox\J-Runner v3 (5) Core Pack_2\common\xsvf\corona.1_3.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]
Programming Coolrunner
F:\xbox\J-Runner v3 (5) Core Pack_2\common\xsvf\corona.1_3.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]
Programming Coolrunner
F:\xbox\J-Runner v3 (5) Core Pack_2\common\xsvf\corona.1_3.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]
Programming Coolrunner
F:\xbox\J-Runner v3 (5) Core Pack_2\common\xsvf\corona.1_3.xsvf
USB XSVF Player Initialized
Xilinx Device ..... [NOT DETECTED]
ECC created
Version: 10
Flash Config: 0x00043000
Writing Nand
image_00000000.ecc
Done!
in 0:19 min:sec
 
nofeloniesyet

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
so you attempted to program the cr4 right? thats what ur logs show.yopu do not program the cr4,its already pre programmed.use the cr4 guides!
 
Last edited:
G

greatbillo

Junior Member
Nov 29, 2014
11
0
yes i did but its was nit done as i git the "Xilinx Device ..... [NOT DETECTED]" and when searched it out i found the same u advised that i dont need to programme it but i am not able to Boot Xell can you pleae provide me any step by step guide for CR4 Xl
 
G

greatbillo

Junior Member
Nov 29, 2014
11
0
I have set Dip to 3 and 8 On and can you please send me link of Uber guide will be very thankful
 
G

greatbillo

Junior Member
Nov 29, 2014
11
0
i have seen Live Stream CR4 noted that he used Magic files ECC. Should I have too used these files please guide
 
nofeloniesyet

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
greatbillo said:
i have seen Live Stream CR4 noted that he used Magic files ECC. Should I have too used these files please guide
Click to expand...
the magic files are now part of jrunner by ticking the cr4 box in jrunner,no need to manually load them anymore.

ubbers corona v3-v6 guide here
ubbers corona v1-v2 guide here
ubbers trinity guide here
ubbers rgh2+ for phats guide here
ubbers rjtag for phats guide here
 
Last edited:
G

greatbillo

Junior Member
Nov 29, 2014
11
0
I have used the same method for soldering i need J Runner guide for Corona V3 using CR4 XL and JRP2
 
nofeloniesyet

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
greatbillo said:
I have used the same method for soldering i need J Runner guide for Corona V3 using CR4 XL and JRP2
Click to expand...
if you need help that in depth,i strongly suggest you read the included pdf in jrunner folder.tween reading that and the cr4 tuts you should have what you need to do the job.
 
  • Like
Reactions: greatbillo
G

greatbillo

Junior Member
Nov 29, 2014
11
0
I found CR4 Option but now facing another problem Motherboard type changes from Corona to Trinity and also CB version and all other settings and i am unable to Create ECC and Write ECC

===================================================
Thursday, December 4, 2014 9:42:02 PM


J-Runner v0.3 Beta (6) Started






Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 9188
Trinity
Reading Nand to F:\xbox\J-Runner v3 (5) Core Pack_2\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:22 min:sec


Reading Nand to F:\xbox\J-Runner v3 (5) Core Pack_2\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Trinity
RGH2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:21 min:sec


Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image

==========================================================
 
You must log in or register to reply here.