X360USB PRO - Update Tool v0.12

fits13

Senior Member
Feb 28, 2011
111
0
Re: X360USB PRO - Update Tool v0.9

I ask it because i don't know if i move the switch back to of the correct time or more than late.

So i want to ask if with the switch to on i open the program and begin the update progress and leave it end and then move the switch back to of i have problem?

The procedure i want to do is:

1. Open the program
2. Connect the x360usb pro to pc
3. Move the switch to on position
4. Load and begin the update progress from the program
5. When the update progress FINISH i move the switch back to off position

With the above procedure does the update progress work or not?
 
Last edited:

dec0y7

VIP Member
Apr 15, 2010
160
0
Sheffield uk
Re: X360USB PRO - Update Tool v0.9

I ask it because i don't know if i move the switch back to of the correct time or more than late.

So i want to ask if with the switch to on i open the program and begin the update progress and leave it end and then move the switch back to of i have problem?

The procedure i want to do is:

1. Open the program
2. Connect the x360usb pro to pc
3. Move the switch to on position
4. Load and begin the update progress from the program
5. When the update progress FINISH i move the switch back to off position

With the above procedure does the update progress work or not?
no.

it should be this



Simply move the update switch to the left (Labeled ON) and connect to USB. The device will automatically set itself up in windows - no extra drivers are required.

When connecting your X360USB PRO make sure it says "EEPROM UPDATED" before continuing to update the firmware.

Simply load the latest fw file and click update. Then move the switch back to its normal position (Labeled OFF) while it writes the firmware. The X360USB PRO bootloader switch should be in the OFF position at all times for normal operation.



as easy as that :)
if you want to thank anyone, thank Ubergeek for it,
and it really does only take 1 min
 
Last edited:

fits13

Senior Member
Feb 28, 2011
111
0
Re: X360USB PRO - Update Tool v0.9

I ask because i don't know if i move the switch sooner or later that really is the correct time so this is the reason i ask if the all procedure can it done with the above my procedure that it safer and more easy than that.
 

Mike B

Senior Member
Mar 3, 2011
103
0
Re: X360USB PRO - Update Tool v0.9

Move it as it starts updating. How simple can it be.
 

dec0y7

VIP Member
Apr 15, 2010
160
0
Sheffield uk
Re: X360USB PRO - Update Tool v0.9

if you want to try it your way then please let us know what happens, but for me i'll do it the way ive been told it do it ie Ubergeek way, not only because thats the way it should be done but because i know everyone else has done it that way.
its easy and quick so i dont really know what the problem is.
 
Re: X360USB PRO - Update Tool v0.9

@ fits13

Come on man, if you can't follow a thing that easy.....



Oh well then....

1. Move the switch to "ON"
2. Open the Update Tool and select the firmware file.
3. Connect the X360USBPro to the PC.
4. Wait a little and then in the Update Tool, you'll see "EEPROM UPDATED" come up.
5. Click Update.
6. While it is showing that it is updating, move the switch to "OFF"

All Done!
 
Last edited:

X-b0n3z

Junior Member
Sep 18, 2005
17
0
Orange, CA
I have tried to update my X360USB Pro using the help instructions on the XECUTER X360UPB Pro Firmware Update Tool v0.12 (moving the switch back to the right WHILE it's updating). :D

However I'm not quite sure it was successful. Is there a way to tell what firmware is on the X360USB Pro?

thanks,

-b0n3z

Below is the info during the process:

XECUTER X360USB PRO Firmware Update Tool
Version: 0.12

No device found.
XECUTER X360USB HID bootloader attached.
BootLoader Version:1.0.3

Loading: C:\Users\b0n3z\Desktop\X360USB_PRO_0.18.1.hex
Erasing Flash...
Writing Flash:..................................................
Done!
Verify Flash: ..................................................
Done!
Write Verified...
Resetting Device...
XECUTER X360USB HID bootloader removed.
 

Martin C

VIP Member
Jan 10, 2004
36,033
0
Scotland, UK
www.team-xecuter.com
I have tried to update my X360USB Pro using the help instructions on the XECUTER X360UPB Pro Firmware Update Tool v0.12 (moving the switch back to the right WHILE it's updating). :D

However I'm not quite sure it was successful. Is there a way to tell what firmware is on the X360USB Pro?

thanks,

-b0n3z

Below is the info during the process:

XECUTER X360USB PRO Firmware Update Tool
Version: 0.12

No device found.
XECUTER X360USB HID bootloader attached.
BootLoader Version:1.0.3

Loading: C:\Users\b0n3z\Desktop\X360USB_PRO_0.18.1.hex
Erasing Flash...
Writing Flash:..................................................
Done!
Verify Flash: ..................................................
Done!
Write Verified...
Resetting Device...
XECUTER X360USB HID bootloader removed.
That's a successful report.

Once you've put it back to normal mode (bootloader to off) and reset the device by unplugging and plugging in to USB, open JungleFlasher. It will tell you what version you're running.
 

X-b0n3z

Junior Member
Sep 18, 2005
17
0
Orange, CA
That's a successful report.

Once you've put it back to normal mode (bootloader to off) and reset the device by unplugging and plugging in to USB, open JungleFlasher. It will tell you what version you're running.
Thank you Martin C for the quick response! Below is the info I recieved from JungleFlasher :)

JungleFlasher 0.1.82 Beta (234)
Session Started Sat Apr 23 09:55:47 2011

This is a Wow 64 process running on 8 x 64 bit CPUs
X360USB PRO detected, Version 0.18


So I'm set up - thanks for the help. :D

Maybe a request for v.next XECUTER X360USB PRO Firmware Update Tool: show the current firmware version of the device (even if it does show in JungleFlasher).

-b0n3z
 

scott1503

VIP Member
Jul 21, 2012
1,786
88
Harrogate, North Yorkshire , uk
  • Like
Reactions: stj2112

stj2112

Full Member
Feb 25, 2012
89
8
England, UK
Or you could have just looked in the downloads and got v0.14 look here
Yea thanks scott1503 reading one of the earlier threads I thought I had to use v0.12 for the X360USB PRO v1 and I thought that v0.14 was for the USB PRO v2 only
but now having looked properly v0.14 does both happy dayz !!:smile:
 

Dameon

Full Member
Nov 7, 2013
45
0
Or you could have just looked in the downloads and got v0.14 look here
The page STATES v0.14, but clicking the link results in downloading X360USBPRO_UPDATE_TOOL_v0.12.zip (783KB), which when extracted yields version .14.
 
Last edited:

RhoTrux64

VIP Member
Jun 22, 2004
591
0
Fail. The page STATES v0.14, but clicking the link results in downloading X360USBPRO_UPDATE_TOOL_v0.12.zip (783KB.)

I hope the issue is fixed soon.
No issue. If you would have downloaded and unzipped it, then you would have seen that it is indeed the v0.14.exe
 
  • Like
Reactions: Dameon

Dameon

Full Member
Nov 7, 2013
45
0
No issue. If you would have downloaded and unzipped it, then you would have seen that it is indeed the v0.14.exe
True indeed. Very tricky of them to hide the .14 version inside a .12 archive.

Disregard my earlier post... which I will now edit.