X360USB PRO V2 - Product Description

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA


After months of development and thousands of test hours, two worlds collide with the much-anticipated and long-awaited X360USB PRO v2!

BEST OF BOTH WORLDS

The X360USB PRO was the world’s first SATA to USB Mass Storage controller that not only enabled WINAPI over USB, but also PORTIO. Xecuter has taken the design one step further by integrating all of the functions of the hugely successful CK3i!

This powerful all-in-one tool is the result of an intense design collaboration between Team Xecuter and Team Jungle. The X360USB PRO v2 is the most advanced WINAPI/PORTIO to USB adapter & 360 Connectivity Tool ever created. One stand-out feature is that you are now able to connect all 360 DVD Drives and 360 Hard Drives to any PC or Laptop simply by connecting to a USB port, and when used with Jungle Flasher all of the DVD Drive’s Power and flashing capabilities are included and also with the option of complete automation. No more struggling with specific SATA chipsets or issues with awkward operating system setups or any strange power or eject timing issues for vendor mode, not to mention so much faster and more noob-friendly than anything else on the market.

Now tasks such as repairing your Xbox 360 DVD Drive’s firmware or upgrading your broken DVD Drive to a new one without the expensive fees charged by the manufacturer just got easier than ever before. Whether you are a beginner or advanced user, this multi-use Mass Storage controller is an essential addition to any toolkit. You can even connect your 360 Hard Drive to get full access to your files, or even connect any Western Digital Hard Drive and convert it to be 360-compatible using the X360USB PRO HDD Hacker tool – no other device can do this in Windows!

The layout of the entire circuit has also been completely redesigned using the same high-end facility that produces the best-selling X360USB PRO v1, and is now packed with more features than ever before, giving you everything you need in one handy device. This truly is the modder’s tool of choice.

You will also be happy to know that the X360USB PRO v2 is released complete with its slick-designed case to give extra protection and a quality design that is not just on the inside, but on the outside too.

BONUS "SECRET" FEATURE

As many followers know, production has been delayed since the end of 2011 as Xecuter were working on a new killer feature that would seal the deal for the X360USB PRO v2 as being the absolute ultimate in 360 DVD/HDD connectivity and data conversion/transfer.

As of March 2012, success was achieved in giving the X360USB PRO v2 a truly awesome feature. You are now able to connect any stock 360 DVD Drive to your computer using the X360USB PRO v2 via USB and it will instantly give it a drive letter in Windows! No custom firmware required, no 0800 firmware required, ANY stock 360 Drive can be used to rip and protect your originals using a new upcoming version of XBC with a fully optimized profile giving total support for XGD3 with the data throughput supporting the maximum possible bus speed using ANY stock 360 DVD Drive model (That’s all Phat and all Slim models – including the Hitachi 0500 !).

It has been suggested by another manufacturer that using USB3 gives faster ripping speeds, but obviously this is nonsense as USB2 supports up to 22x, and the 360 DVD Drive peaks at around 12x – so you will have the maximum possible speed that the system can handle available to you at all times.

This has never before been achieved and we feel it gives the X360USB PRO v2 the honor of truly being the most powerful tool ever created for the 360 Repair professional.

Whether you are a beginner or advanced user, this multi-use Mass Storage controller and Automated Power Adapter is an essential addition to any console engineers toolkit.

Comprehensive Feature List:

DATA FEATURES

  • Connect any SATA device to any PC or laptop via USB
  • Compatible with All Phat 360 DVD Drives Hitachi, Samsung, Benq & Liteon
  • Compatible with All Slim 360 DVD Drives Liteon & Hitachi
  • Compatible with Xbox 360 Hard Drives (Phat & Slim)
  • Repair your Xbox 360 DVD Drive within minutes – no more weeks of waiting!
  • Easy Drive Key Extraction & Updating (Additional Tools Required For Liteon Drives**)
  • Full access to your Xbox 360 Hard Drive
  • Convert any WD Hard Drive to be 360 Compatible using X360USB PRO HDD Hacker tool in Windows!
  • No SATA Port Required
  • Fully compatible with Jungle Flasher
  • No More Driver / OS / SATA / Compatibility Problems
  • Fully Upgradeable On-Board Firmware
  • Supports Mass Storage Mode As Default
  • Dual-Mode PORTIO & WINAPI
  • Enhanced WINAPI speed for tools such as Xbox Backup Creator
  • Power, Status & Activity LED’s

POWER FEATURES

  • 100% Compatible with all 360 DVD Drive models both Phat and Slim.
  • 100% Compatible with all flashing tools inc Jungle Flasher
  • JungleFlasher-Controlled Power ON/OFF/CYCLE
  • Manually-Controlled Power ON/OFF/CYCLE
  • JungleFlasher-Controlled Eject Open/Close/Half Tray
  • Manually-Controlled Eject Open/Close/Half Tray
  • JungleFlasher-Controlled ModeB
  • Manually-Controlled ModeB
  • Molex replaced with SATA Power Connector – Prevents connecting power cable incorrectly
  • Molex to SATA convertor included if you don’t have a Sata PSU
  • Self-Resetting PPTC Fuses for added current protection
  • Extra power filters for a cleaner, safer design
  • Extra USB Power available at the flick of a switch if your USB port isn't giving enough juice
  • Auto/Manual Mode LED’s
  • Power On/Off LED
  • ModeB On/Off LED

RIPPING FEATURES

  • Convert any stock 360 DVD into an 0800 ripping drive without modifying the firmware
  • 100% Compatible with XBC (v2.9.0.420 and above)
  • Even works with Hitachi 0500*! (Liteon DG-16D5S 1175 Support Coming Soon)
  • Supports all formats inc XGD3
  • No CFW required! Works with any stock 360 DVD Drive
  • Supports the maximum possible speed that the drive can handle
  • We recommend all rips are run through ABGX to get the perfect median AP2.5 Profile.

OTHER INFO

  • Custom-Designed Case
  • Trusted Xecuter Design
  • Proven Track Record of High Quality
  • Superior After-Sales Support – Forums with 220,000+ Users
  • Official Product Website: www.x360usb.com
  • Download Drivers: Click Here

Packaging Includes:

  • X360USB PRO V2
  • SATA Cable
  • USB Cable
  • 360 DVD Power Link Cable
  • SATA POWER to MOLEX Adapter
*You will need to RGH your console to retrieve the Hitachi 0500 DVD key.

**CK3 Probe 3 is required for Liteon DG-16D2S key extraction, Sputnik360 Probe or Sputnik360 Switch is needed for Liteon DG-16D4S key extraction

Note: 12v MOLEX/SATA PSU is required for all DVD drive power functions. A 5v USB power source is not adequate.
 
L

LoneWolf913

Finally an excuse to upgrade from my trusty VIA card. I'll be picking one up in a few weeks once any bugs get worked out and everybody has 'em back in stock after the pre-order blitz.
 

Jahaziel

VIP Member
May 28, 2010
177
0
Bradenton, FL
"the much-anticipated and long-awaited X360USB PRO v2!"

You got that right ;) Been waiting on it for a while and I trust I won't be disappointed given this product description.
 

pcfr33k

Full Member
Nov 22, 2010
25
0
If there any chance that a bug cannot be resolved with a firmware update and only a hardware modification?

I know this hardware is QA'd beyond belief but there are things that R&D cannot themselves control. For example a bad chip run from the manufacturer.

I am sure its rare but can this happen or has it happened yet on any of the more current hardware releases?

In other words if I buy this X360USB Pro V2 today I know that were will not be a X360USB Pro revision V2a tomarrow due to a circuit re-design?
 
Last edited:

synxx

VIP Member
If there any chance that a bug cannot be resolved with a firmware update and only a hardware modification?

I know this hardware is QA'd beyond belief but there are things that R&D cannot themselves control. For example a bad chip run from the manufacturer.

I am sure its rare but can this happen or has it happened yet on any of the more current hardware releases?

In other words if I buy this X360USB Pro V2 today I know that were will not be a X360USB Pro revision V2a tomarrow due to a circuit re-design?
i think if there was a problem like this the product would be recalled lol.
also team xecuter are thee best at testing there products before sale to the public so dont worry about anything like that.
if you buy one and there is a inherited hardware fault and the product isnt recalled and you dont get your money back i will personally refund you or buy you a V2a when released. theres my confidence in the product for you and i havnt even recived my own X360usb pro v2 yet!
 
  • Like
Reactions: Dark_Riku

Dark_Riku

VIP Member
Mar 2, 2012
356
0
i think if there was a problem like this the product would be recalled lol.
also team xecuter are thee best at testing there products before sale to the public so dont worry about anything like that.
if you buy one and there is a inherited hardware fault and the product isnt recalled and you dont get your money back i will personally refund you or buy you a V2a when released. theres my confidence in the product for you and i havnt even recived my own X360usb pro v2 yet!
This guy speaks the truth. TX are guaranteed to give you the best quality products. If anyone can beat their products. They don't belong in this universe.
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
If there any chance that a bug cannot be resolved with a firmware update and only a hardware modification?

I know this hardware is QA'd beyond belief but there are things that R&D cannot themselves control. For example a bad chip run from the manufacturer.

I am sure its rare but can this happen or has it happened yet on any of the more current hardware releases?

In other words if I buy this X360USB Pro V2 today I know that were will not be a X360USB Pro revision V2a tomarrow due to a circuit re-design?
There isn't any hardware bug so not sure what you're talking about ?

Fw updates add new features and address issues such as ihas updating (as proved last week)

Its always possible that you can get a faulty unit, this is why it carries a warranty, like most goods sold by companies on the planet earth :p

If you are so worried about this sort of thing you shouldn't be involved in custom modding bud.
 

pcfr33k

Full Member
Nov 22, 2010
25
0
There isn't any hardware bug so not sure what you're talking about ?

Fw updates add new features and address issues such as ihas updating (as proved last week)

Its always possible that you can get a faulty unit, this is why it carries a warranty, like most goods sold by companies on the planet earth :p

If you are so worried about this sort of thing you shouldn't be involved in custom modding bud.

I think I may have not worded my post correctly.

I have purchased a lot of hardware from team exec more than 3 times what I would have paid for just having my 3 xbox's modded by someone else so I think I have done pretty good so far.

I have seen in the past for example my old electronic vintage analog synth go through minor mods like adding a capacitor here or a resistor there after finding out there was some issue in the audio or digital path.

I know this is a different animal but I was speaking in regards to if there was something in the signal path found later on or has that even ever happened yet?

I actually never meant faulty because you would not have released it that way. I meant a minor issue found out some time later on that was never demonstrated during alpha and beta testing and that would be resolved either with firmware/driver update or actually hardware mod to resolve the issue?
 
Last edited:

synxx

VIP Member
I think I may have not worded my post correctly.

I have purchased a lot of hardware from team exec more than 3 times what I would have paid for just having my 3 xbox's modded by someone else so I think I have done pretty good so far.

I have seen in the past for example my old electronic vintage analog synth go through minor mods like adding a capacitor here or a resistor there after finding out there was some issue in the audio or digital path.

I know this is a different animal but I was speaking in regards to if there was something in the signal path found later on or has that even ever happened yet?

I actually never meant faulty because you would not have released it that way. I meant a minor issue found out some time later on that was never demonstrated during alpha and beta testing and that would be resolved either with firmware/driver update or actually hardware mod to resolve the issue?
i think your looking too deep into it pal, its been tried and tested for what it should do and been proven to work.
if there was any hardware fault that needed addressing because it caused problems for what its designed to do then it would most likely be recalled and refunds issued.
if there was a problem then the forum would be flooded with complaints wouldn't it?
so don't worry yourself about it pal :) jump in and get yourself one if thats what your wanting to do.