BENQ X360USB pro v2

[davross23]

Ok so ihave only ever flashed my xbox once back when it was LT2.0, someone flahsed it recently to 3.0 for me and i could only play non xgd3 games, this week i bought a X360usbpro V2 and a liteon ihas b burner.

I updated the dashboard to 15574 and then i flashed using the usbpro.

Everything went ok and flash was successful, when i try to launch any previously backed up games the xbox just sits at "reading" or launches and then boots right back into the dashboard.

Below is the Jungleflasher log:

============================================

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Jul 03 22:28:12 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 1 Com Ports.
Found 11 windows drives C: D: E: F: G: H: I: J: K: M: N:
Found 1 CD/DVD drives G:

New CD/DVD detected.
Found drive C: - Hard Drive.
Found drive D: - Hard Drive.
Found drive E: - Hard Drive.
Found drive F: - Hard Drive.
Found drive G: - CD/DVD.
Found drive H: - Removable.
Found drive I: - Removable.
Found drive J: - Removable.
Found drive K: - Removable.
Found drive L: - CD/DVD.
Found drive M: - Network.
Found drive N: - Network.
No Hitachi drives were found!
Drive is Benq..
Drive is Benq..

Sending Magic Keys to Drive on port 0x0000
.................................................
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Dumped in 8349mS
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xE030 E8B9C20CC023DF7F91F5C0EBAD4EC97B
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: BenqAP25v3.0 VAD6038
Key database updated


Loading MTK_Flash source file
Loading firmware file F:\Software\PS3 XBOX WII\XBOX\JungleFlasher.0.1.92.Beta(304)\JungleFlasher v0.1.92 Beta (304)\firmware\LT-Benq-0800-v3.bin
MD5 hash: 31b7a19fa0e92c27060a77bb0cf37fcf
Genuine Benq LT 0800 v3
Inquiry string found
Identify string found
Drive key @ 0xE030 77777777777777777777777777777777
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: BenqAP25v3.0 VAD6038
Spoofing Target
DVD Key copied to target
Inquiry string copied to Target
Identify string copied to Target


Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Blank Test !

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Blank verified OK !

Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Benq..

 

[XxPOYSONxX]

It looks like you flashed a 800 firmware for backuping games on it mate, other than that you flashed fine, reflash with the correct firmware

 

[XxPOYSONxX]

Just to add, the firmware should be: 64930c lt3.0 I think not 800, and always flash to stock BEFORE updating.

 

[davross23]

Thanks for the quick response, do you mean the target firmware im selecting is incorrect?

I have the ixtreme firmware pack what one should i use as the target?

---------- Post added at 15:21 ---------- Previous post was at 15:14 ----------

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Jul 03 23:16:31 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 1 Com Ports.
Found 11 windows drives C: D: E: F: G: H: I: J: K: M: N:
Found 1 CD/DVD drives G:

Drive is Benq..
Drive is Benq..

Sending Magic Keys to Drive on port 0x0000
.................................................
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Dumped in 8335mS
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xE030 E8B9C20CC023DF7F91F5C0EBAD4EC97B
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: Stock
Key database updated


Loading MTK_Flash source file
Loading firmware file C:\Users\Davross23\Desktop\870_LTPlus-benq-v3.0\LTPlus-benq-v3.0.bin
MD5 hash: 8784e0f4ce27941a2a3293c8a5ac85e4
Genuine LT plus v3.0
Inquiry string found
Identify string found
Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target


Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Benq..

---------- Post added at 15:27 ---------- Previous post was at 15:21 ----------

Yeah i was burning the wrong firmware, second time round with the right FW sorted it, thanks again.

 

[XxPOYSONxX]

Haha no worries good to hear you got it sorted