LITEON 0225 x360USBPROv2 Kamikaze method unlocked once then immediately locked again....

[ronboogie]

I am running JungleFlasher 0.1.96(323)
Using X360USBPro v2.
Lite-on DG-16D4S Winbond Drive

The issue is spi unlocking the drive.

Went thru obtaining the key chip with no problem and initially unlocked spi with kamikaze method.
Got the spi status 0x00 but when I attempted to read the status changed.
Tried resetting JF and spi back to 0x8C. Tried unlock and got the H/W protected message.
From there it waits for the status change.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Thu Jan 02 02:08:35 2014

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 3 Com Ports.
Found 13 windows drives A: C: D: E: F: G: H: I: J: K: P: Q: U:
Found 6 CD/DVD drives G: H: I: K: P: Q:

Drive is Slim Lite-On..

Key found in KeyDB at record (5 - Slim 360 Key)
Key is:
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000
...............................................................................................
Sending Spi UnLock request to Port 0x0000
.
Aborted by User!


Do I have to drill more now? What did I do incorrectly that it no longer reads unlocked?

 

[Martin C]

I suggest you stop and make sure the drive still works.

 

[ronboogie]

Connected the drive back to the box and it runs like normal. No errors at all.

 

[Antalpromille]

i cant see from your log that it actually unlocked even once.

 

[ronboogie]

This is the third instance the drive was connected. I got spi status 0x00 but when I attempted to read the drive the status went back to 0x51 and wouldn't recognizethe drill method again.

 

[ronboogie]

Here is the chip. Not sure if I went far enough or if the angle is off. Still plays normally. Just questioning whether or not to drill further.

Got this message:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Fri Jan 03 01:03:01 2014

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 3 Com Ports.
Found 13 windows drives A: C: D: E: F: G: H: I: J: K: P: Q: U:
Found 6 CD/DVD drives G: H: I: K: P: Q:

Drive is Slim Lite-On..

Key found in KeyDB at record (5 - Slim 360 Key)
Key is: 9AB3ABD25C80CF51AF0E95C905841918
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.............
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000
...................................................................................................................................................................................................................
Spi Status: 0x00

Getting Status from port 0x0000
Invalid Status 0x80

 

[Vinneh]

I would stop and count the pins. I edited the picture you posted through paint it looks like you have drilled in the wrong spot. I would double check and count the pins again to make sure.

 

[ronboogie]

Pretty sure I know the issue. Getting different tone and registering at different spi status register.
Have gotten

spi register 0x00
spi register 0x05


Never got spi register 0x03.

Little help on how to correct this please???

 

[xzanox]

You could still drill "very" carefully on the correct spot. If it doesn't work or whatever, you can fall back to a unlocked pcb. Or stop at all and use the drive as it is now without errors as a original drive.

 

[Martin C]

How did you manage to miss the point by so much????

 

[ronboogie]

Used the template. That's where it dropped me. Will try and drill the right spot tonight. Well keep you guys posted.

 

[Martin C]

always pin count - I've never had an issue with this method.

 

[xzanox]

Used the template. That's where it dropped me. Will try and drill the right spot tonight. Well keep you guys posted.

Be extra carefull attempting the right spot, because the excisting hole will try to drag you into that one again. So especially now go slow as you can. Straight from the jf PDF, slowly does it.

 

[BL4K3Y]

I use this tutorial to accurately mark the correct location on each chip.

I killed two PCBs by guessing where to drill, but I have done 5 Kamikaze hacks using the above method with 100% success so far.

All you need to do is take a photo of the chip, mark it out using MS Paint and find the location on the chip.