X3CE issue: banks 1-4 empty; banks 5-8 doesn't respond

[mamutas]

Hi all pros out there,

I got my X3CE with solderless adapter installed on my Xbox 1.6b (or is it 'c'?) over this weekend.
I am trying to flash the BIOS but strange things occur.
If I set switch to banks 1-4 (on on off off off) and boot - the external switch glows blue, but there is nothing on screen.
If I set switch to banks 5-8 (off on off off off) and boot - the external switch glows blue and screen shows "FlashBIOS 3.03" with a menu below. I have nothing fancy connected to the console but original controller. However, I cannot navigate through menu.
When I press both power and eject together, the external switch glows red/blue but nothing is on screen.

Please help.

 

[Poida^]

Original controller only thing connected to the ports? No matter which one you pick?
You could also try the remote control if you got that as well.

Note: Make sure you read up about 1.6B's... There's only 1 bank with FlashBIOS 3.0.3.
The rest are FlashBIOS 3.0.1 which works on every other version except 1.6B.
Main thing to note is flash to banks 1-4 by changing the switches once you boot to FlashBIOS 3.0.3.
Then flash with X3_3294_v16plus.bin file
and once X3 bios is up and running, update your backup bios with FlashBIOS 3.0.3

 

[mamutas]

Thank you for response.
I tried original controller connected to port 1 and then 3. Same results - I cannot navigate menu. EDIT: I had tried my other wireless Logitech controller - but it did not worked either. I had only one controller plugged at a time and had my console off when replugging.
I had learned about 1.6b and FlashBIOS versions - that would explain why I don't see anything from banks 1-4 or from backup bios.
I have CD burned and ready to install X3_3294_v16plus.bin but I can't navigate menu! I will try ports 2 and 4 although I doubt it would help.

 

[DJBOOBY]

xbox dvd remote work too
try with xbox dvd tray out