X3CE with 1.6 won't boot when modchip on???

[hpham1107]

I Just install two of my xbox same modchip (X3CE) but different xbox version v1.0 and v1.6. Everything working perfectly with xbox v1.0. Installation on 1.6 take me little bit longer and everything have been done with extra attention. The problem when I turn it on with chip enable it flashing green and red and no video. It boot fine when chip disable, and boot fine with backup fashbios 3.03-1. I did switch the chip from the other box still got the same problem but still working fine on the other xbox (1.0).

Any advises, guys.

Thanks.

 

[Poida^]

I wrote a similar thing about that in this post,
http://teamxecuter.entryhost.com/forums/showthread.php?t=34073[url="http://teamxecuter.entryhost.com/forums/showthread.php?t=34073"] [/url] hoping it would be helpful but I guess people want special attention to their problems.

Try changing the switches around for your 1.6 to load 1st or 2nd bank.
It depends on which 1.6 is compatible with FlashBIOS sometimes.

 

[Rookio]

The reason your 1.0 chip doesn't work in your 1.6 xbox is because they use a different bios.
Each bios released has a standard version and a v16plus version. So boot the 1.6 to backup and flash it with the v16plus version (you should already have this as it came in the same .rar file)

 

[Poida^]

Whoops, didn't read it properly. Flash with correct bios. Thats the better answer since you are booting up on FlashBios already.

 

[hpham1107]

Problem fixed. I just re-flash chip bios from xbox v1.0 with all latest bios then put it back in xbox v1.6 then it work just fine now. Thanks for everything guys.