Xbox 1.0 alternate soldering spot

[Nvufaceman]

I had a problem with soldering the D0 and the trace came up. I fixed that and the xbox works but after using the trace repair pen I can't solder to the spot I fixed. Any one know of any alternate spots to solder the D0 so that I can get this X3 working? Any help would be appreciated. This is a 1.0 Xbox.

Thanks Faceman

 

[Martin C]

There's a d0 point on the underside too - check out any installation guide for an X3 on 1.0-1.5 Xbox and look for the d0 point.

Martin

 

[Nvufaceman]

I know about the bottom D0 point and that is where I pulled up the trace but would like to know if there is a topside D0 sport or another place to solder to instead of the original place.

 

[Martin C]

I know about the bottom D0 point and that is where I pulled up the trace but would like to know if there is a topside D0 sport or another place to solder to instead of the original place.

Here:

http://www.teamxecuter.com/23b/lite/1011_lpc_wires.jpg

The grey circle is the d0 point.

Martin