Xbox 1.6 frags red/green when X2.6 is -O-N-....

caio80

Noob Account
Nov 2, 2004
5
0
Ferrara, Italy
Hi there,

so:

just rebuilt the lpc bus with the 4 wires at the bottom. I'm sure about the solders, this the 7th xbox (3rd 1.6) i chipped, even tested every point with a multimeter.

Problem is, whatever I choose (bank 1-2, flash protect on/off), with the chip DISABLED xbox frags red/green after 3 shut and restarts, and there are 3 green leds and one blue lit on the front panel of the 2.6.

When the chip is -E-N-A-B-L-E-D-, just a red led on the left of the front panel lights up, and (incredible) the xbox turns on like everything is usual, no cromwell, no flashbios, no sh*t! and plays whatever disc i throw at it (original, of course...)

Damn, THIS is weird. The net is full of "my xbox frags when chip is on", but nothing when chip is OFF!!!! and anyways, when chip is ON, it actually does NOTHING that resembles the state ON!!!!

What the HE....ck...

Please, do say something that can resolve my sh*tty situation over here...

signed
A desperate Italian...
 

ThaCrip

VIP Member
Aug 18, 2004
756
0
USA
as usuall it's most likely a soldering issue... check solder and try again ;)

p.s. i know u dont want to hear this but it's most likely the problem... unless something is physically damaged etc.

have a good day ;)
 

MKChampion

VIP Member
Oct 12, 2004
875
0
Toronto, Canada
you can check you points again as mentioned before

but also check the wires from the external switch to the chip and make sure you have good and secure connections at both ends and that none of the wires and getting pinched

try taking the chip out of the box and booting up

it is boots fine then your swtich is labelled incorrectly
 

smokingmods

Senior Member
Oct 25, 2004
133
0
Dark Side of the Sun
would check
a. my soldering
b. my bios 1.6 requires the rite one
c. the actual wire install if you used wires and not pogo or pin header, sometimes you
will get the pic of the x3/2.6 side by side and use the WRONG ONE they are NOT THE SAME at all
 

caio80

Noob Account
Nov 2, 2004
5
0
Ferrara, Italy
- SOLVED -

thanks all for the help. Unfortunately I wrote wrongly the title of this thread, so I reopened the right one here: http://www.teamxecuter.com/forums/showthread.php?p=128561#post128561 .

in that link I explain what the heck happened, and how it got solved.

thanks to you guys all, hope I will be of any help to any of you guys in the near future...

By the way, I want you all in front of the tv the 25th of May, Milan-Liverpool, THAT is gonna be a great match! even if we already know who's gonna win, right????

Ciao a tutti!