RGH Xbox 360 E 250GB Corona V5

free_ryder

Junior Member
Dec 31, 2013
18
0
Namibia
team-xecuter.com
OK, again an update.
Below the alternate point for the blue wire.

140118-IMG_20140118_150544.jpg

The yellow wire:

140118-IMG_20140118_145718.jpg

On the yellow wire, you'll notice 2 wires. One is taped, in order to avoid it making contact with other points on the motherboard. Purpose is to be able to install the heatsink/crossclamp and everything in the case and still be able to tweak the RGH if needed.

To my surprise, booting is 90% on 1st glitch, with VERY SELDOM MAXIMUM of 4th glitch prior to being able to boot.

So to summarise - the only hardware used was:

Slim Proto V2
AND
PostFix

That was it. Easier actually than it started out to be.

Other problem I have been facing is problems getting the xbox to recognise a BRAND NEW 2TB USB external (USB3) --- found the problem to be the following:

Newly formatted partition MUST be marked as PRIMARY - seems this was the culprit. All the reading/browsing, seems nobody figured this out - or it isn't documented very well --- perhaps it can be made into a sticky?

Used a program called EaseUs partition manager:::: http://www.easeus.com/

Regards
ReefWarrior