RGH Xbox 360 E not booting on retail nand

[Alkatraz]

Hello guys. Please if someone could help me. I tried to rgh console with motherboard corona v3 i managed to extract nand dumps with two bad blocks. The blocks are remaped by jrunner but it didn t glitch at all. I wrote back retail nand and xbox dosen t turn on at all. After 2 - 3 sec power button turns red. iRemoved the wiring and coolrunner, cleaned solder points still no go

Also tried to read +write nand it gave me same results, and while writting back nand i have this Error: 202 writing block 30C

Used:Coolrunner: cr3 lite (lk All open), Lk2 Closed S2 1,6 on
Motherboard: Corona V3
Nand programmer: Jrunner programmer V1


Sunday, July 27, 2014 9:26:24 PM


J-Runner v0.3 Beta (4) Started




Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Comparing...
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Nands are the same
Retail Selected
Connection Error
Checking Files
Version: 01
Flash Config: 0x00000000
Can not Continue
Connection Error
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Version: 01
Flash Config: 0x00000000
Can not Continue
Device Not Found.
Version: 01
Flash Config: 0x00043000
Writing Nand
nanddump1.bin
Error: 202 writing block 30C
Done!
in 5:47 min:sec


Version: 01
Flash Config: 0x00043000
00043000
Corona
CB Version: 13182
Corona
Reading Nand to F:\Xbox360 Hack\Jrunner\J-Runner\output\nanddump1.bin
Reading Nand
Error: 250 reading block 30C
Error: 250 reading block 336
Done!
in 5:12 min:sec


Reading Nand to F:\Xbox360 Hack\Jrunner\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Reading Nand
Error: 250 reading block 30C
Error: 250 reading block 336
Done!
in 5:12 min:sec


Comparing...
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Nands are the same
Could not find a part of the path.


===================================================
Sunday, July 27, 2014 10:04:44 PM


J-Runner v0.3 Beta (4) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Comparing...
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Nands are the same
Connection Error
Checking Files
Connection Error


===================================================
Sunday, July 27, 2014 11:18:03 PM


J-Runner v0.3 Beta (4) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished


===================================================
Sunday, July 27, 2014 11:42:13 PM


J-Runner v0.3 Beta (4) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
RGH2 Selected
Nand Initialization Finished
Comparing...
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Bad Block ID 030C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID 0336 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 030C [Offset: 0xC91800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0336 [Offset: 0xD3EC00]
Bad Blocks Remapped
Nands are the same
Corona Manually Selected
Checking Console..
Device Not Found.

 

[jsinger47]

The issue here is not likely with the bad blocks.

Red light would be caused by you damaging the console.

 

[Alkatraz]

Can you give me any advice??!! Where to start

 

[jsinger47]

Start by getting the secondary error code.

 

[Alkatraz]

How to check seconadry code on Xbox360E. It s different than a xbox slim or fat.

 

[Antalpromille]

How to check seconadry code on Xbox360E. It s different than a xbox slim or fat.

It's done the same way on all xboxes and if you don't know how to check, use the search function or Google it.

 

[jtag360.nl]

Strange, you are talking about an Corona V3, but it is an Slim E.

Did you also bridged r2c6 and r2c7 when the CR was installed?

 

[Steel-Cleiton]

I think you made ​​a very big sh*t
I'm 99% sure that this is a corona 4gb
just look at J2C1 region
place a picture of your nand to make sure