RGH Xbox 360 E RGH First time preparation

[ponuod]

So i'm preparing for the first time RGH on 'E' Corona board ( see pic. ), and
have all the tools: SD RW Kit, Postout Fix, and other things - done RGH on older mobo.

My questions:
- for this board should i solder R2C10 to read Nand, or not
- R2C(6,7), should solder after glitch chip install ?

Thanks.

 

[john mathews]

what chip are you installing in it first

 

[ponuod]

I'm first wanna prepare for solid Nand Read/Write [ have TX RW Kit] - since it's looks harder part.
x360run i think gonna use, CR rev.c not recommended for Coronas !
I'm first wanna know about those resistors, since not all guides mention it ?

 

[Joo C]

Bridge r2c6 and r2c7

 

[ponuod]

Those two bridges is for Glitching - Right ?
For the Nand RW no need to bridge anything ?

 

[GeekHeat]

r2c6 and r2c7 u need to bridge for E and F points for the glitch chip yes.

R2c10 is only needed for bridging if u are reading the nand with spi on 16mb nands

 

[ponuod]

Got it, thanks.