Xbox 360 Falcon Not Booting Rgh 1.2 Nand (xell boots)

TechManSaver

Senior Member
Jul 26, 2015
101
0
Berthoud,Colorado
Hi there,i have rgh 1.2 this falcon xbox,and i have got the cpu key and created a glitch2 17349 dash image and written to it.But now when i power on the console,i either get 2 red ring of death errors.The bottom right led will start flashing,or just the top right and the bottom left will start flashing.And i can still boot into xell.Which is weird.And sometimes,it will stay normal and then 3 green leds will stay on and then all 4 will and switch back and forth and never boot.
log:===================================================Sunday, July 26, 2015 10:21:52 AM


J-Runner v0.3 Beta (7) Started






Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 9188
Trinity
Falcon Manually Selected
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 9188
Trinity
Reading Nand to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Falcon Manually Selected
Done!
in 3:26 min:sec


Reading Nand to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Falcon/Opus
Reading Nand
Glitch2 Selected
Nand Initialization Finished
Glitch2m Selected
Glitch2 Selected
Done!
in 3:27 min:sec


Comparing...
Nands are the same
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Glitch2 Selected
Falcon Manually Selected
ECC created
Version: 10
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:19 min:sec


USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Users\Joshua Francis\Desktop\Timing Files\rgh12_15.xsvf
Sending Out Packets .........
Success
Falcon Manually Selected
ECC created
Version: 10
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:19 min:sec


Connection TimeOut
Connection TimeOut
Connection TimeOut
Connection TimeOut
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Wrong cpukey
Getting info from ip 192.168.75.140...
LockDownValue is 12
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Falcon/Opus
Nand Initialization Finished
Load Files Initiliazation Finished
Clean SMC detected
17349
Started Creation of the 17349 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.15.709
---------------------------------------------------------------
base path changed to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image


done! fsroot found ok!
---------------------------------------------------------------
C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\173838584005\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17349.0
Console : Falcon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial : 173838584005
ConsoleId : 027396027152
MoboSerial: 7578536232838405
Mfg Date : 10/04/2008
CPU Key : 073FCFBD0C7B29510270874AF992C91C
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : BAB6228486E10A3D5131D880D7C91028
CF LDV : 12
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\173838584005
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Glitch2 Selected
Load Files Initiliazation Finished
17349
Started Creation of the 17349 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.15.709
---------------------------------------------------------------
base path changed to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image


done! fsroot found ok!
---------------------------------------------------------------
C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\173838584005\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17349.0
Console : Falcon
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 173838584005
ConsoleId : 027396027152
MoboSerial: 7578536232838405
Mfg Date : 10/04/2008
CPU Key : 073FCFBD0C7B29510270874AF992C91C
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : BAB6228486E10A3D5131D880D7C91028
CF LDV : 12
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\173838584005
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Version: 10
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 3:41 min:sec


Version: 10
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 3:39 min:sec


Retail Selected
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Retail Selected
Version: 10
Flash Config: 0x01198010
Writing Nand
nanddump1.bin
Done!
in 3:38 min:sec


Glitch2 Selected
Initializing nanddump2.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Glitch2 Selected
Glitch Selected
Retail Selected
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Glitch2 Selected
CR4 Selected
CR4 de-Selected
CR4 Selected
CR4 de-Selected
Load Files Initiliazation Finished
17349
Started Creation of the 17349 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.15.709
---------------------------------------------------------------
base path changed to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image


done! fsroot found ok!
---------------------------------------------------------------
C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\173838584005\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17349.0
Console : Falcon
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 173838584005
ConsoleId : 027396027152
MoboSerial: 7578536232838405
Mfg Date : 10/04/2008
CPU Key : 073FCFBD0C7B29510270874AF992C91C
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : BAB6228486E10A3D5131D880D7C91028
CF LDV : 12
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Joshua Francis\Desktop\RGH EVERYTHING\J-Runner v3 (5) Core Pack\173838584005
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Version: 10
Flash Config: 0x01198010
Writing Nand
updflash.bin



(i thought i would post this because the other stated fixed)
 
Last edited:

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
Really? your not gonna get support for RGH 1.2 on the TX forum site

Well i guess i am wrong, things have changed
Cant see why it wouldn't be supported.
U will still need a nand x or jr programmer plus a genuine coolrunner to do rgh1.2 which are all tx products.
 

joshypoo

VIP Member
Feb 21, 2014
184
0
South OC California
Well yes i agree with you in general. but at some point in the past someone here on the TX site would have told him hes not getting support cause they didn't did do what 15432 has done with RGH1.

or am i wrong once again?
 

john mathews

VIP Member
Jan 3, 2014
2,546
88
peoria illinois
Well yes i agree with you in general. but at some point in the past someone here on the TX site would have told him hes not getting support cause they didn't did do what 15432 has done with RGH1.

or am i wrong once again?
u are right, its not supported here there was a thread awhile back someone posted and it got deleted, but wait and see, I could be wrong, theadmin or mods will respond
 

GeekHeat

VIP Member
Jun 28, 2013
1,805
88
lancashire
Well I've not heard from anyone saying its not supported. Aslong as they are using genuine tx products I will support it until I'm told otherwise.
 

jdoe91011

VIP Member
Nov 18, 2013
156
0
Well I've not heard from anyone saying its not supported. Aslong as they are using genuine tx products I will support it until I'm told otherwise.
Agreed. I have done a few successful RGH 1.2 installs, all using genuine TX products. I will offer support until told otherwise. The behavior you are experiencing is most likely that you having the wrong timing file flashed to your Coolrunner. I have never experienced such odd behavior, RGH 1.2 always just works right off the bat for me.

All you have to follow is:

RGH 1 configuration/wiring on chip and motherboard, respectively
RGH 2 Freeboot Image/ECC written to console NAND
RGH 1.2 Timing Files flashed to chip

BOOM! Instaboot!
 

ChoCho346

VIP Member
Feb 25, 2013
188
23
Odessa, Tx
I've done many installs but only one RGH1.2 and oddly had the same problem. Make sure the coolrunner to jr programmer is not connected and also disconnect your power supply and reconnect in 30 seconds. After doing that I got instaboots to xell and to the dashboard everytime.
 
Last edited: