Xbox 360 NAND Flasher

L

Lighthammer34

Full Member
Jan 19, 2011
26
0
Ok so here goes, I have a live box and a non live box,the non live box was previously flashed with extreme 1.6, as this box will never go online, I was quite happy swapping my profiles from each box, until I got flagged for trying to play ACB, and now my profile gets corrupt every time moving from box to box, I read the tutorial on unflagging your 360 but thought the Ltp thing was a bit fiddly,so I have sent for a xbox 360 NAND Flasher , so my question is can I dump the NAND with the Flasher instead of the Ltp method and still run it through FindSecData and use Nandpro also.

Best regards

Lighthammer34
 
L

Lighthammer34

Full Member
Jan 19, 2011
26
0
That's great, I thought I might be wrong , thanks very much for your help, just 1 last thing as this is the first time I will be attempting this, it looks quite straight forward, is it really that easy ?

Best Regards

Lighthammer34
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
No, your dump can be 100% good but findsecdata needs to locate a valid secdata.bin. Sometimes it can't.

Where are you located ?


Sent from my iPad using Tapatalk.
 
L

Lighthammer34

Full Member
Jan 19, 2011
26
0
Martin C said:
No, your dump can be 100% good but findsecdata needs to locate a valid secdata.bin. Sometimes it can't.

Where are you located ?


Sent from my iPad using Tapatalk.
Click to expand...
I live near Sheffield, but originally from fife in Scotland, so if it can't find it, does that mean I can't unflag the box ?

Best Regards

Lighthammer34
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
I asked because unless you intend on keeping hold of the NAND flasher, buying it to find out it can't be done (or worse still, screwing something up) might be a waste of money. You could send it to someone and if it's doable, great. If not, it's cost the price of getting someone to check it out (which realistically should be zero).


Sent from my iPad using Tapatalk.
 
L

Lighthammer34

Full Member
Jan 19, 2011
26
0
Ok so here goes, i got my nand flasher only to find that it didnt come with any wires to connect it to the MBoard, so i looked on the website and turns out i need another connector (solderless adapter)to be able to use the flasher, so another £20 (£42 to far) so this was then fitted and i used nandpro to get 3 good dumps of my nand so then i run findsecdata and the results are attached ( sorry tried to get them to display)

read a few posts and im looking like i am stuffed, but then read somewhere that hex workshop could solve my problem manually but could not find a tut, so not sure what to believe, any help on what do do next would me much appriciated

Best Regards

Lighthammer34

 
You must log in or register to reply here.