RGH Xbox 360 slim wont power on!!!!! BEEPS

[se7esnsins]

Hi, I am having trouble with my Xbox 360 slim Trinity RGH. Every time I hit the power/eject button I get a beep but Ring of light does nothing fans don't spin etc...The power brick light stays orange and have tried a different power brick that is working on another slim.Any help would be great.https://fbcdn-sphotos-e-a.akamaihd....640_762856517117609_2136260696115140576_o.jpg

 

[Taijigamer2]

Please fill in this template including clear pics of glitcher and install.

 

[BL4K3Y]

Have you checked for standby voltages on the motherboard?

You should get 1.8V, 3.3V and 5V readings.

 

[se7esnsins]

TX Product(s) used: J-R Programmer v2Console Type: TrinityNAND size: 16mbDashboard version: e.g 2.0.16747

 

[se7esnsins]

https://scontent-b-lhr.xx.fbcdn.net...640_762856517117609_2136260696115140576_o.jpg

 

[BL4K3Y]

https://scontent-b-lhr.xx.fbcdn.net...640_762856517117609_2136260696115140576_o.jpg

Your Facebook link isn't working.

Upload the images to one of the many image hosting sites and use IMG tags to add the links to your post.

Did you check for standby voltages as per my previous post?

 

[se7esnsins]

i had it working like i was installing xex menu and dashlaunch etc.... then turned it off went and got a drink come back up turned it back on...i was on the pc then i look and seen that it did not boot this time so i look and the green light was not flashing so i open the shell etc...i found that the r3b15 wire was off the point it somehow rubbed onto another point beside R3B15

 

[BL4K3Y]

i had it working like i was installing xex menu and dashlaunch etc.... then turned it off went and got a drink come back up turned it back on...i was on the pc then i look and seen that it did not boot this time so i look and the green light was not flashing so i open the shell etc...i found that the r3b15 wire was off the point it somehow rubbed onto another point beside R3B15

That resistor (STBY_CLK on a Trinity motherboard) is a very small and fragile point which will lift very easily if you are not careful.

You can use FT3N2 underneath the board instead (it isn't surrounded by any small components, so it is easier to work with).

If the original point has already been damaged, you will need to repair it first or the console will not power on.

Look at the image below for it's location (ironically, it has been posted on the se7ensins forum lol).

 

[se7esnsins]

http://i.imgur.com/XF90JRb.jpg

- - - Updated - - -

http://i.imgur.com/JDZIJCi.jpg

 

[se7esnsins]

them links work now how will i repair the damaged points ??

 

[john mathews]

no support for clone chips

 

[se7esnsins]

BL4K3Y ??

 

[john mathews]

BL4K3Y ??

u sir have a clone chip no support here get a tx chip

 

[BL4K3Y]

We don't offer support for fake/cloned products.

If you search the forum, you will find out how to repair a damaged STBY_CLK point.

Thread closed.