Xbox 360 Trinity (Retail) Won't boot........

speed3r

Junior Member
Nov 30, 2011
19
0
Behind you
Hello,

So i got a Xbox 360 trinity retail(was never openend before/sealed) for a few bucks that didn't boot.
After a lot of searching and testing it still wont boot sadly.
When i plugin the power supply the xbox beeps one time (On/off sound) after that i can press all the buttons(on/off/eject) and all it does is beeping at me.....
I noticed that when i hook a wired controller to it, the controller only shows for 1 sec the 2 green lights after that nothing till i re-plug it again.

Things i tried:

Check usb ports (there all oke)
removed hdd & dvd drive (No luck)
Removed face plate and tried on/off button on the rf module (same thing only beeping)
Removed rf module and tried booting with a wired controller.
Checked the mobo for damaged (didn't found anything)
3 different PSU 135w 10.83a


So does anyone got a clue what this might be?
 
Last edited:

speed3r

Junior Member
Nov 30, 2011
19
0
Behind you
Post pics of Motherboard
i need to reopen that sucker so that will be in a day or 2.
Pics of front and back?



this is a tx product help forums/community.
no worries i got a JR Programmer v1.1 (With speed upgrade) also ordered back in the days cr rev c for all the modding and for this one i will order a CR4 XL ;)

Also this section: The Noob Room If it's not firmware or rgh/jtag related and if you are completely clueless as to what you are talking about, then feel free to post in here and hopefully you will be educated :)

So i think i can ask about a retail xbox that wont boot?
 

Running4Hippos

VIP Member
Dec 22, 2015
339
0
Ontario, Canada
Pics of front and back, look for blown/missing capacitors

One of the pads might be missing, also look for lifted pads
 

speed3r

Junior Member
Nov 30, 2011
19
0
Behind you
Pics of front and back, look for blown/missing capacitors

One of the pads might be missing, also look for lifted pads
I already checked the mobo didn't see anything wrong but hey some extra eyes can't hurt right ;)
Will post pics in a day or 2/3.
Also you want me to remove the heatsink?

post pics of jr programmer and cr w/ ur user name.
Yes Sir! only it will be from the JR Programmer because i don't have any cr anymore yet first i need to fix the console before ordering a new cr.
 
Last edited:

Running4Hippos

VIP Member
Dec 22, 2015
339
0
Ontario, Canada
I already checked the mobo didn't see anything wrong but hey some extra eyes can't hurt right ;)
Will post pics in a day or 2/3.
Also you want me to remove the heatsink?



Yes Sir! only it will be from the JR Programmer because i don't have any cr anymore yet first i need to fix the console before ordering a new cr.
Ya remove the heat sink
 

b3datarin

VIP Member
May 30, 2011
194
23
Iran
if you hear beep afterplug power cord
did you try replace NAND TSOP ?
read retail image with J-R and write it to donor chip