Xbox Backup Creator v2.9 Build:0350 by Redline99

Wamphyri2b

Senior Member
May 30, 2009
104
0
USA
I am one of those that like to play it super safe, even with my own rips. Normally I rip, check with abgx for correct ssv2/DMI, burn, then check my burn with abgx. Since xgd3 I cannot use abgx to verify my xgd3 rips or patch them if they deviate too much. I can use XBC to patch the SS/DMI that's verified on ABGX the same way I patch the topology data, correct?
 

theflash

Junior Member
Sep 6, 2011
10
0
Every copy of the latest version of XBC that I have downloaded has been flagged for containing the following virus.

not-a-virus:hack.tool.Win32.agent.heur

Has anyone else gotten this error?
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
I am one of those that like to play it super safe, even with my own rips. Normally I rip, check with abgx for correct ssv2/DMI, burn, then check my burn with abgx. Since xgd3 I cannot use abgx to verify my xgd3 rips or patch them if they deviate too much. I can use XBC to patch the SS/DMI that's verified on ABGX the same way I patch the topology data, correct?
Why would need that if you ripped yourself ?

Just do as the instructions tell you, and what everyone else is doing.

Rip then patch the median and burn.
That's it, nothing else.
 

Wamphyri2b

Senior Member
May 30, 2009
104
0
USA
Why would need that if you ripped yourself ?

Just do as the instructions tell you, and what everyone else is doing.

Rip then patch the median and burn.
That's it, nothing else.
I explained why I feel I need to do that. Politely & within forum rules. I have a BenQ with 0800v3, in case you were wondering. I don't know if you've had a bad 0800 rip before but I have. Right now we are without a working program to check our XGD3 disc security. I see no harm in still wanting to have the safest possible rip. Topology data isn't the issue here. I read the instructions & understood the topology stuff on the first read. I don't think asking whether the program will patch the SS & DMI of an XGD3 disc properly isn't fitting for the support thread for this program.
 

Wamphyri2b

Senior Member
May 30, 2009
104
0
USA
Sorry for the double post, but there doesn't seem to be a way to edit my above post.
After some searching on the net to find the address of where both XGD2 & XGD3 security sectors are supposed to go, it seems to be patching SS/DMI of XGD3 discs just fine. So far my Gears 3 & Space Marines SSv2 match abgx's exactly, probably making all of this a moot point. It's still good to know the SS/DMI injection works for XGD3 if needed.
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Stop thinking you will hurt yourself.

Rip it, patch it, burn it.

That's it end of list. If its bad you won't get that far. I've worked on this with the dev team for months, I know what I'm talking about.

If this isn't.good enough for you, stop modding and get another hobby. Either listen to the pro's or just stop.
 
  • Like
Reactions: m3lvin

spookyman166

VIP Member
Jun 13, 2011
192
0
NZ
Hey Uber, i see you said to undo the AP25 scanning... Its only used for DEV's

Is there any advanced info that shows how to use the scanning to make topology data?

Cheers
 

Wamphyri2b

Senior Member
May 30, 2009
104
0
USA
Stop thinking you will hurt yourself.

Rip it, patch it, burn it.

That's it end of list. If its bad you won't get that far. I've worked on this with the dev team for months, I know what I'm talking about.

If this isn't.good enough for you, stop modding and get another hobby. Either listen to the pro's or just stop.
You know, you could have just said "Yes you can, but there's no point." Why you bring all this attitude to a simple question about another function of the program is beyond me. I never said you didn't know what your talking about. I KNOW you know what your talking about. There's respect there for your technical know how. I've been modding 360's for almost three years now & have learned a lot from your posts. That being said, it isn't up to you how much I think or what I learn. I will however think twice about just how much I really need to know something before asking a question on here again. Now frankly, I would like to drop this. I can't believe my initial post has went this direction.
 

ochentay4

Full Member
May 12, 2011
35
8
Argentina
You know, you could have just said "Yes you can, but there's no point." Why you bring all this attitude to a simple question about another function of the program is beyond me. I never said you didn't know what your talking about. I KNOW you know what your talking about. There's respect there for your technical know how. I've been modding 360's for almost three years now & have learned a lot from your posts. That being said, it isn't up to you how much I think or what I learn. I will however think twice about just how much I really need to know something before asking a question on here again. Now frankly, I would like to drop this. I can't believe my initial post has went this direction.
Hi, I'll try to help politely, even though its exactly what Uber told you The best way is:
1. Rip your own game with your Benq 0800v3 drive and Xbox Backup Creator v2.9 Build:0350
2. Patch the iso with the correct MEDIAN.BIN file.
3. Burn it.

It is really simple. You don't need abgx360, ssv2 files, nothing really. Just Rip, Patch and Burn like Uber said. There is NO BETTER/MORE SECURE METHOD.
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
You know, you could have just said "Yes you can, but there's no point." Why you bring all this attitude to a simple question about another function of the program is beyond me. I never said you didn't know what your talking about. I KNOW you know what your talking about. There's respect there for your technical know how. I've been modding 360's for almost three years now & have learned a lot from your posts. That being said, it isn't up to you how much I think or what I learn. I will however think twice about just how much I really need to know something before asking a question on here again. Now frankly, I would like to drop this. I can't believe my initial post has went this direction.
You've read it wrong, again.

I never said yes you can. That old method is not required if you are ripping your own 0800 v3. I shouldnt have to explain this as its old news. I told you clearly what to do, TWICE but for some reason you are herping derping and this is making you think too much which in turn is making you post drivel.

So, again, do what I told you to do and play your games like everyone else.
 

DUSTYB3N

VIP Member
Jun 17, 2011
462
0
Blackpool UK
Just followed the tutorial to the word however in the tutorial you use a liteon DG 16D2s

I'm trying with my benq 64930c and it's not listed under options, drive specific.

Can somebody help, thanks
 
Last edited: