Xbox boot screen hanging! HELP!

[dle]

Hello everyone,

I have an x3, just installed it and it WAS working! I installed the new bios and that worked and everything and I tweaked with the X3 config live. I chose to "quickboot" evoX from my C:\ drive and then did a "reboot to dash" but now it just hangs on the "Xecuter rocks my box" screen forever! (i don't think i installed evoX properly and was just trying to see if that would let me boot up evoX)

I was just wondering what i can do to fix this. Is there ANY WAY to remove/uninstall a bios that you've already installed? I tried to re-flash the 1mb bank (on on off off) bank but that still didn't remove the old settings and it still hangs after bootup. Any help is appreciated. Thanks!

DLe

 

[jonrees69]

No problem ...

Try holding the little white button to see if this will get you into Live config before it hangs.

Failing this, put the switches in the off,of,off,off position to select bank 2 of the 1mb and flash the 1959 there again.

There is also an X3-Erase file in the .RAR file when you downloaded the 1959 BIOS - run this to erase bank 1 and then re-flash that if you want.

Job done.

J