GENERAL xbox dead when demon switched on

B

briggs01

VIP Member
Feb 17, 2013
1,324
0
can you gus take a look over my soldering etc because i cant see anything wrong , if i boot from stock it boots
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected

Checking Files
Jasper 512MB Manually Selected
Finished Checking Files
Initializing nanddump1.bin..
Jasper 512MB
Nand Initialization Finished
Initializing nanddump1.bin..
Jasper 512MB
Nand Initialization Finished
Moving All files from output folder to C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\152119293005
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:03 min:sec

Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image


******* WARNING: could not patch SMC reset limit!

---------------------------------------------------------------
C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\152119293005\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16547.0
Console : Jasper (big block)
NAND size : 64MiB (system only)
Build : JTAG
Xell : power on console with console eject button
Serial : 152119293005
ConsoleId : 019585309842
MoboSerial: 703877D117039295
Mfg Date : 07/20/2009
CPU Key :
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key :
CF LDV : 10
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\152119293005
Image is Ready
Initializing updflash.bin..
Jasper BB
Nand Initialization Finished
Jasper 512MB Manually Selected
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:36 min:sec
ok but when i switch the demon on the xbox is dead
 

Attachments

Last edited:
nofeloniesyet

nofeloniesyet

VIP Member
Jan 16, 2011
4,830
128
Nowhere
briggs01 said:
can you gus take a look over my soldering etc because i cant see anything wrong , if i boot from stock it boots
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected

Checking Files
Jasper 512MB Manually Selected
Finished Checking Files
Initializing nanddump1.bin..
Jasper 512MB
Nand Initialization Finished
Initializing nanddump1.bin..
Jasper 512MB
Nand Initialization Finished
Moving All files from output folder to C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\152119293005
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:03 min:sec

Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16547
Started Creation of the 16547 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.11.647
---------------------------------------------------------------
base path changed to C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image


******* WARNING: could not patch SMC reset limit!

---------------------------------------------------------------
C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\152119293005\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16547.0
Console : Jasper (big block)
NAND size : 64MiB (system only)
Build : JTAG
Xell : power on console with console eject button
Serial : 152119293005
ConsoleId : 019585309842
MoboSerial: 703877D117039295
Mfg Date : 07/20/2009
CPU Key :
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key :
CF LDV : 10
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\mel\Desktop\J-Runner v02 Beta (288) Core Pack\152119293005
Image is Ready
Initializing updflash.bin..
Jasper BB
Nand Initialization Finished
Jasper 512MB Manually Selected
DEMON
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:36 min:sec
ok but when i switch the demon on the xbox is dead
Click to expand...
you have to build a 16mb image for demon
 
  • Like
Reactions: briggs01
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
What did you expect to happen when you wrote a BB image to a SB NAND?

You've been advised before, this stuff is not for noobs.
 
  • Like
Reactions: briggs01
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
briggs01 said:
got ya but that wouldnt cause the xbox to be dead when demon sellected would it mate
Click to expand...
Of course it would.

The ECC is wrong.
 
  • Like
Reactions: briggs01
You must log in or register to reply here.