SAMSUNG MS28 Xbox Drive Swap

T

TenMen

Noob Account
Nov 8, 2010
6
0
I want to swap A non-working drive for a working one (both samsungs).
My plan is to overwrite the new drive with the old ones OFW & key.
Then, flash it with LT+ 1.9...The dashboard is the latest.
Ive only flashed a drive twice, successful once. I dont want to brick
the new drive so im hesitant. Does this sound right to u guys?
Do i flash it with junglflasher the same way as i did the first one?

Thanks
 
R

RickSizz

VIP Member
Nov 8, 2010
214
0
Standing in the rain
If the board is still good on the broken drive just swap the boards. Try to avoid spoofing even though the new OFW Isn't ms25/ms28 specific anymore its always better to play it safe. Good luck.
 
T

TenMen

Noob Account
Nov 8, 2010
6
0
Bought the drive from ebay. original box has RROD.
Guy claims drive is ok though, getting it today.
 
T

TenMen

Noob Account
Nov 8, 2010
6
0
Very disappointed...just got the delivery of the used samsung drive.
Stained w/roach waste. Reeks of it to. Oh ebay, how can you let this
happen to me...
 
W

wyospartan117

VIP Member
Feb 28, 2011
245
23
Nah
If you're truly on the latest dash (13146) and you aren't spoofing, you can just flash 1.9 to the new drive. If you were to flash the original firmware pre-13146, you will risk a flag as the drive has a new "stock firmware" after the 13146 update.
 
B

Bane2000

Noob Account
Nov 4, 2011
2
0
Hope someone can help. Similar problem to op, sammy ms28 flashed to ofw, then updated dash to latest. Went to reflash with 2.01 but molex upside down and now not found on pc.!!! Purchased new pcb, do I need to overwrite and spoof or just inject original fw onto new board. Found lots of info about similar stuff just not sammy to sammy,
Hope you can advise?
Thanks
 
B

Bane2000

Noob Account
Nov 4, 2011
2
0
Ok cool. Will use the 2.01 but inject key from original drive?

Feel like a noob to be honest! Been doing this a while but school boy error with molex!!

Ah well, live and learn! Thanks for the quick reply
 
You must log in or register to reply here.