Xbox freezes after Original Nand Flash

[dil_king]

Ok so I was trying to Rgh my latest slim but cool runner is broken so I flashed original nand back and when I turn it on the xbox freezes I think it has something to do with the LDV or something so if someone can pint me in the right direction ?

update 1
JUST GOT THE E79 Error

update 2
now it freezes at the logo screen

 

[AteOeight]

Try pulling the HDD out and starting, if I recall, E79 was HDD problems(someone correct me if I'm wrong). Also, what kenel was your original nand on? I think, just like you said, update your LDV on your original nand. Try building it with lastest 360 multi builder.

 

[legitmod]

yes E79 is HDD problem also bootloader problem as well------------------------------------------------------EDIT:This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD.
It can also be related to wiring the diodes while JTAGGING.
Couldn't start xam.xex

 

[dil_king]

im not using hdd and how do i use multi builder to make retail image and update ldv ?

---------- Post added at 19:51 ---------- Previous post was at 19:43 ----------

yes E79 is HDD problem also bootloader problem as well------------------------------------------------------EDIT:This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD.
It can also be related to wiring the diodes while JTAGGING.
Couldn't start xam.xex

This is a brand new xbox which I got today and I stopped Rgh after cool runner was found defective all i had done to the xbox was flash the ECC. after I just flashed original nand and it would freeze.

ALSO THIS IS A TRINITY SLIM

 

[legitmod]

Take a look here http://www.team-xecuter.com/forums/showthread.php?p=498012#post498012 an do you have original nand you compared

 

[dil_king]

Take a look here http://www.team-xecuter.com/forums/showthread.php?p=498012#post498012 an do you have original nand you compared

yep I have 4 Original nand dumps all of them compared fine also I cant boot into xell cause cool runner is defective and I just got this console today manufactured in May 7 2010. Should I just try guessing from what I understand Ldv chnages only after ms update and I haven't run any on it so it should be 0 or 1. but the xbox just freezes at logo some times not even complete logo screen is up and it freezes

 

[legitmod]

what dashboard are you on an what version of multibuilder are you using

 

[WNYConsoles]

What dash was it on prior? Did you remove all of the CR install wires? Can you attach a copy of your nand dump online so I can download and take a look at it?

 

[dil_king]

what dashboard are you on an what version of multibuilder are you using

I did not take look at what dash it was on

---------- Post added at 20:12 ---------- Previous post was at 20:07 ----------

What dash was it on prior? Did you remove all of the CR install wires? Can you attach a copy of your nand dump online so I can download and take a look at it?

all wires are removed and I pm ed you the link to the nand dump and i do not know what dash it was on

 

[dil_king]

I did not take look at what dash it was on

---------- Post added at 20:12 ---------- Previous post was at 20:07 ----------



all wires are removed and I pm ed you the link to the nand dump and i do not know what dash it was on

HOW do I make Retail image in multi builder I have latest version

 

[legitmod]

If you have the original Nand dump there is no reason for you to make a retail nand just flash back the original are you getting any errors when flashing the nand back to the console

 

[AteOeight]

360 multi builder v0.82 navigate to my360 folder look for options.ini txt file, in here you need to input your mobo/CPUkey/LDV/DVDkey. Save file and run .exe, don't forget to put your nanddump, cpukey, kv, smc in my360 folder(not 100% about putting all those files in my360 folder). After your image is built, don't forget to erase your input in the options.ini txt file.

 

[legitmod]

360 multi builder v0.82 navigate to my360 folder look for options.ini txt file, in here you need to input your mobo/CPUkey/LDV/DVDkey. Save file and run .exe, don't forget to put your nanddump, cpukey, kv, smc in my360 folder(not 100% about putting all those files in my360 folder). After your image is built, don't forget to erase your input in the options.ini txt file.

at the moment he dose not know what dash the xbox was on so if it was on dashboard 14699 he will be make a retail nand of 14719 which he would have to do a LDV change

 

[dil_king]

360 multi builder v0.82 navigate to my360 folder look for options.ini txt file, in here you need to input your mobo/CPUkey/LDV/DVDkey. Save file and run .exe, don't forget to put your nanddump, cpukey, kv, smc in my360 folder(not 100% about putting all those files in my360 folder). After your image is built, don't forget to erase your input in the options.ini txt file.

I dont have the cpu key the cool runner is defective I have to wait for new one until that I just want xbox working

---------- Post added at 20:46 ---------- Previous post was at 20:44 ----------

I dont have the cpu key the cool runner is defective I have to wait for new one until that I just want xbox working

And i get no errors while flashing nand back to xbox

 

[AteOeight]

at the moment he dose not know what dash the xbox was on so if it was on dashboard 14699 he will be make a retail nand of 14719 which he would have to do a LDV change

Yea, but I'm sure WNY'll figure it out though.:smile:

---------- Post added at 16:49 ---------- Previous post was at 16:47 ----------

And i get no errors while flashing nand back to xbox

By chance did you have any bad blocks in your reads?

 

[legitmod]

as said before in the post above you need your cpukey to build a retail NAND

Originally Posted by AteOeight
360 multi builder v0.82 navigate to my360 folder look for options.ini txt file, in here you need to input your mobo/CPUkey/LDV/DVDkey. Save file and run .exe, don't forget to put your nanddump, cpukey, kv, smc in my360 folder(not 100% about putting all those files in my360 folder). After your image is built, don't forget to erase your input in the options.ini txt file.

But with you flashing your original nand dump your console should be booting right up unless there is an error some where which there is upload your nand so i or wnyconsoles can take a look an see if there is a problem in your nand

 

[dil_king]

If I post a link to my nand here is it a bad thing like does it contain information which shouldn't be given out like my KV and other things ?

 

[AteOeight]

That's correct, only PM people with status here, but not everyone will be willing to help....

 

[dil_king]

as said before in the post above you need your cpukey to build a retail NAND But with you flashing your original nand dump your console should be booting right up unless there is an error some where which there is upload your nand so i or wnyconsoles can take a look an see if there is a problem in your nand

I pmed you my Nand and posted a pic of at its frozen state

 

[WNYConsoles]

NAND Looks fine. It's actually the first Slim nand, 12625 and LDV is 1. Unless OP ran a update there is no need to change the LDV value.

The nand is fine so it should work without an issue, E79 on a Slim is more than likely related to the nand, my first RGH was a Slim and I had some major E79 issues. You cannot create a retail image without CPU key so that option is not available. This is what I think happened, so try and remember exactly what you did as it is crucial if fixing this.

Did you.....
Dump nand
Possibly update the system?
RGH Install (CoolRunner)
Bad CoolRunner/Soldering
Flashed stock NAND back (without dumping the new updated NAND)?

This would allow the system to boot 1 ROL cycle but while loading 2nd ROL cycle would post E79 and or freeze. If this is what happened then the only thing to do that I can think of off the top of my head would be to RGH it, create ECC from 12625 nand, boot Xell, get CPU Key, dump kv from 12625 and inject into a donor nand.

If this is the case with a update, you need to figure out which one as if it was 14717+ the CB's are updated so that creates a whole new mess to deal with. This could be very time consuming.

Probably best if Martin C chimes in on this thread as he knows more about this type of thing than I do.