After doing some research and apparently not doing enough, I have killed my xbox360, it wont boot either standard xbox dash or NXE/Freestle, just comes on and the power light stays lit, no video. I was researching Xbox dash updates through xbox live and ran a live update on the regular nand side, standard xbox side( I have a demon and coolrunner running), blue switch off. It updated, it shut down and I expected it to come back which it did not. I thought oh well, I can always boot the coolrunner side to fix it, but that doesnt boot either. I have a deamon phat zephyr and coolerunner install with the switch on the front. I can access my Orig nand and deamon chip via usb and jrunner, I have my cpu key. What can I do to get functionality back to my unit? It wont boot either side. Am I screwed here?
RGH Xbox Live Update After Demon Install
- Thread starter rossim0
- Start date
Goldensavage
VIP Member
I have a phat zephyr, did my demon and coolrunner install, both sides worked. I ran and xbox live update on the original nand side and now my system does not boot. I wanted to update the xbox dash side so I could play xbox live on my dual nand xbox. tried to update live since the dash is outdated and now it does not boot, it powers on the power light is steady but does not boot, what other info do you need besides that, I also have access to the deamon vai the usb and jrunner, i checked that much.
Goldensavage
VIP Member
sorry, just say the other questions, this RGH hs worked for 2 weeks, the problem is not soldering or board issues, its an xbox live update issue. Not sure which dash I have but i guess I was updating my dash to the latest one. I have the latest dash possible to perform RGH 1 on, that I remember.
Goldensavage
VIP Member
There's your main problem. You need to rewire the coolrunner for rgh2. The latest updates made phats rgh2.
so there was no way of updating an RGH1 phat to play xbox live on the offical xbox side without updating the wiring for RGH2?
---------- Post added at 13:46 ---------- Previous post was at 13:45 ----------
I cant just flash my backups back to coolrunner or demon and go back to what I had?
---------- Post added at 13:46 ---------- Previous post was at 13:45 ----------
I cant just flash my backups back to coolrunner or demon and go back to what I had?
Goldensavage
VIP Member
No, its too late.
First thing to change in the update is cb.
Your 360 is now split cb.
For Xbox live to work with demon, it needs to be split cb. It is said many times on this site.
o
And no you cannot flash your nand backups back because they were originally Rgh1
First thing to change in the update is cb.
Your 360 is now split cb.
For Xbox live to work with demon, it needs to be split cb. It is said many times on this site.
o
And no you cannot flash your nand backups back because they were originally Rgh1
Last edited:
sick360mods
BANNED
it was almost impossible to solder rgh1, now I have to do rgh2 wiring. I'm done with this bullshit. The xbox is going in the garbage. Thanks for the help.
Goldensavage
VIP Member
Why the garbage. It's only some soldering.
Just some small wire adjustment.... What country are you based in
I'm in USA, Jersey. I wrestled with this goddamn xbox and the soldering was the easy part, the software is terrible the dashboards are built crappy and the emulators suck. I had more with the 2004 xbox emulation and applications that today and this has been around for 3 years. If you local or even in the tristate area i'll pay you to fix this for me, I will NOT go back into this goddamn xbox. I have too much other sh*t to do. spent too much time on this. If your local, the job is yours. If your interested i'll give you my number via email. We can talk about it.
Goldensavage
VIP Member
Sorry I'm UK
I would suggest putting a request in the request for service section. There ate some fine cheap people on here.
I think there are 1 or 2 in your area.
I would suggest putting a request in the request for service section. There ate some fine cheap people on here.
I think there are 1 or 2 in your area.
sick360mods
BANNED
I'm doing free work right nos. So just pay the shipping ( $11 ) and ill get it running for you with the demon to if you want
Pro bono work for the next 5 people. contact me for details
i could do it myself, i just dont care too. This stuff was interesting 10 years ago when i was in highschool. I dont have any time for it, I dont have the patience, thats for sure. I do have money, but I dont want to wait. Wish i had someone local who could just do this all and explain it to me. I have no problem paying people. Thanks for the info bro.
Goldensavage
VIP Member
sick360mods
BANNED
I'm in ny so shipping should only take a day. So if you think about it you can have it back in 3 days. I can help explain things over skype if you want
Pro bono work for the next 5 people. contact me for details
Pro bono work for the next 5 people. contact me for details
sick360mods
BANNED
He's coming to get it fixed. It's a zephyr so hopefully it will glitch on rgh2
Pro bono work for the next 5 people. contact me for details
Pro bono work for the next 5 people. contact me for details