Xbox nand wont boot -Glitch or Retail

A

advancedservers

Junior Member
Sep 23, 2012
22
0
Hi Martin,

Yes i did confirm LDV.......

Thanks

---------- Post added at 03:11 ---------- Previous post was at 03:06 ----------

here are the install pics




 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
I think there's a lot of conflicting information.

I don't think it's a soldering issue.

Post the following:

1. the content of fuses.txt or a screenshot of your CURRENT XeLL bootup.
2. A screenshot of your current retail image loaded into J-Runner (showing LDV etc).
3. Another screenshot of the working RGH image loaded as above.
 
  • Like
Reactions: advancedservers
Dicko316

Dicko316

VIP Member
Dec 13, 2010
794
68
North East/UK
Get some more pics up too please, looks like the points D0-D7 need attention.


Also it doesn't matter if the LDV value is in the LEFT or RIGHT side box, it only matters that the LDV value of 4 is the same side as your current dash version. So if your dash version is 14719, and its located in "6BL [CF] Patch 1" & "7BL [CG] Patch 1" then you put the LDV of 4 in the Right hand box. If its in patch 0 then put it in the left box.
[Which from my understanding means that you do not need to modify anything, your current original nand is good]
 
  • Like
Reactions: advancedservers
A

advancedservers

Junior Member
Sep 23, 2012
22
0
Jrunner is on a laptop with internet connection.

---------- Post added at 03:33 ---------- Previous post was at 03:32 ----------

Closeup of d0 - d7



---------- Post added at 03:36 ---------- Previous post was at 03:33 ----------

Without Internet
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
So there's nothing wrong with either NAND.

XeLL is at 4, as is your retail and RGH NANDs.

You're not trying to boot RGH on retail and vice versa?

LED off - Console

LED on - DemoN
 
A

advancedservers

Junior Member
Sep 23, 2012
22
0
I have tried RGH and Retail images on stock NAND. M both will not work. The only thing I can get to boot from stock NAND is xell.

The demon will load both RGH or retail image.

It is very weird...
 
A

advancedservers

Junior Member
Sep 23, 2012
22
0
Wont boot from stock NAND but will boot from demon

---------- Post added at 04:38 ---------- Previous post was at 04:35 ----------

When booting from stock NAND you can hear a fan tick noise every 6 seconds
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Can you post your J-Runner log? I know you don't have internet access on the laptop, but you should be able to copy to a USB stick.
 
stefanounick

stefanounick

VIP Member
Jun 9, 2010
1,178
118
Orbiting Sun
manwithoutname said:
You need the one on your left, so how come your original NAND dump has an LDV value of 3 while your actual console's NAND has an LDV value of 4?

Have you ran any updates after you attempted the glitch?
Click to expand...
Wrong, imagine there are two slots for dashes, one for the current one and one for the previous, it doesnt matter its left or right (patch 0 or 1 in other words)

Are there any bad blocks on stock nand ?
Sent from my Galaxy Nexus
 
Last edited:
A

advancedservers

Junior Member
Sep 23, 2012
22
0
Hi Sorry for the delay my net went down!!

Jruner log for writing retail image to stock nand.


===================================================
Sunday, January 02, 2005 11:26:18 PM
J-Runner v0.2 Beta (283) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
X-Consoles loyalty bonus - DEMON15OFF until 31st
Checking Files
Finished Checking Files
Initializing Nand..
Nand Initialization Finished
Current: DemoN
Switching to XBOX
Success
XBOX360
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:33 min:sec

---------- Post added at 04:01 ---------- Previous post was at 04:00 ----------

Writing RGH to stock nand


Initializing Nand..
Nand Initialization Finished
XBOX360
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:29 min:sec

---------- Post added at 04:02 ---------- Previous post was at 04:01 ----------

Retail to Demon Nand

Current: XBOX
Switching to DemoN
Success
Initializing Nand..
Nand Initialization Finished
DEMON
Hardware : Demon Slim
Firmware : 1.0
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Writing Nand
Done!
in 0:34 min:sec

---------- Post added at 04:04 ---------- Previous post was at 04:02 ----------

Creating RGH from Retail Image.

Load Files Initiliazation Finished
14719
Started Creation of the 14719 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.04.535
---------------------------------------------------------------
building glitch image
---------------------------------------------------------------
C:\Documents and Settings\tamara\Desktop\J-Runner v02 Beta (280) Core Pack\J-Runner v02 Beta (280) Core Pack\071799204408\updflash.bin image built, info:
---------------------------------------------------------------
Console : Trinity
NAND size : 16MiB
Build : Glitch
Xell : power on console with console eject button
Serial : 071799204408
ConsoleId : 027809090791
MoboSerial: 9256232203760448
Mfg Date : 10/27/2010
CPU Key : 8499097E4505F4EE17EA1ADBA9427781
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 22E4500340FA3EBFE56AAD74C205D7CD
CF LDV : 4
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Documents and Settings\tamara\Desktop\J-Runner v02 Beta (280) Core Pack\J-Runner v02 Beta (280) Core Pack\071799204408
Image is Ready
 
A

advancedservers

Junior Member
Sep 23, 2012
22
0
i did write the retail image to both the Stock & demon NANDS.

I only wrote the RGH for additional logging.

d**ko....

Why do I have to retouch the solder points... Can you see something wrong?
 
You must log in or register to reply here.