xbox not booting when drive connected

[snake007]

Ok I tried to glitch my jasper bb today got the nand ok flashed the ecc to the nand but it wouldn't boot to xell. Coolrunner was glitching fine but it would not boot. It was a 16mb bb. I tried everything but still couldn't get it to boot. So I put my original nand back to the xbox and it booted straight away. So I put it all together then tried to boot again but now the center light just flashes green. If I disconnect the dvd drive then it boots. Not sure what to do now?

 

[Martin C]

pics of your wiring and soldering are ALWAYS needed when you have something not working on RGH but working on stock.

 

[snake007]

no wires are soldered any more. I took everything off

 

[console repair world]

try different sata and power cables as these sometimes flake out when removed

 

[snake007]

Cheers but sussed it now. There was a tiny bridge on the R4B24. Booting now many thanks.

Wonder if this is what caused it not to boot to xell?

If I do the alternate point under the board on FT2R2 what wire do i use and what length do it have to be?

 

[console repair world]

good to hear, time to rgh again then

 

[superspeed]

Cheers but sussed it now. There was a tiny bridge on the R4B24. Booting now many thanks.

Do you happen to have a picture of the location and the 2 points that were bridged so we will know for future issues concerning this.

 

[Martin C]

Cheers but sussed it now. There was a tiny bridge on the R4B24. Booting now many thanks.

Yep, I suspected as such. This is why I asked for pics.

Glad you sussed it though.

 

[snake007]

It was just the 2 copper points that was bridged. ANyone got any ideas about the wire for the alternate point?

 

[snake007]

If I do the alternate point under the board on FT2R2 what wire do i use and what length do it have to be?

 

[superspeed]

If I do the alternate point under the board on FT2R2 what wire do i use and what length do it have to be?

A wire the same gauge as the orange and only needs to be long enough to reach the alternate point.

 

[snake007]

many thanks mate, so i could use one of the wires from the slim pack then.

 

[superspeed]

many thanks mate, so i could use one of the wires from the slim pack then.

Correct the blue wire could be cut down to size just fine.

 

[snake007]

cool thanks again will try again tomorrow. Bloody Jasper this is the first one I have had trouble with