Xbox one

B

butowood

VIP Member
Aug 14, 2009
208
23
St. Theresa Point
Need some help with this, I haven't researched this yet but I wanted to ask first, I got a MODDED XBOX ONE and my question is how do I put the stuff I want in there??? Do I "ftp" everything like what you do on a Jtag Xbox 360??? Or is there another way to do this?? Just point me to the right direction please.

Thank you in advance!!
 
B

butowood

VIP Member
Aug 14, 2009
208
23
St. Theresa Point
Okay I just turned on the XBOX ONE all I have on the screen is "Xecuter2 Config Live Loading..." There are four switches all together and I turn one off I think and the XBOX loads with the opening and the XBOX Logo comes on for awhile then a red light comes on and an error 07!!! What does this mean???
 
B

butowood

VIP Member
Aug 14, 2009
208
23
St. Theresa Point
Okay finally got the XBOX to load, the problem was the HD not running, and the evolution dashboard comes on...just wondering how to FTP from the PC to the XBOX??? I jtagged a 360 already and I know how to FTP. Like on a 360 you have to put the 360 on the "xexmenu" in order to ftp anything you are trying to put in the 360, this where I'm stuck with the XBOX ONE. Evoultion dashboard is running but there is nothing in the HD, I'm just trying to put some emulators in there. Any ideas????

Thanks in advance!!
 
S

Skinleech

Full Member
Sep 28, 2005
50
0
EvoX should give you ftp details when you log in, username/pass are likely to be xbox/xbox.

Just try connecting to the IP your Xbox has with those details. You might find that you need to disbale to chip & boot to the regular MS dash and set your IP settings from there.
 
B

butowood

VIP Member
Aug 14, 2009
208
23
St. Theresa Point
Okay I ftped some file to the XBOX one already but stll no joy. I put a Nintendo emulator in the E drive along with other stuff but still nothing. when i turn on the xbox the evolution x dashboard comes up then I hit the MS Dasboard the Evolutin screen comes up then fades away to the Evox Dash??? I know I ftped the stuff to the right drive which is "E" but thats what I've been reading where to put the files in. So I need some help with this.


Thanks in advance.
 
sebastian79hl

sebastian79hl

VIP Member
May 31, 2010
313
0
Germany, Rieps
konsolenumbau.expert
Get an Auto Installer CD.

Init the Harddrive totaly!

Maybe its not properly formatted..... It should show you the HDD!

Do you know if you have a Partition G. installed?

Of cause JUST when you got an Chip in it!

In an good Auto Installer CD you will have everything
you need to format the HDD install Dashboards (different Versions of cause) etc etc.

But just Do this when you now you have an Chip installed!

Greetz Seb.
 
You must log in or register to reply here.