CK3 PRO Xbox Slim Flashing?

[simon00says]

Just a quick question folks

Can all Xbox 360 Slims be flashed with the Xecuter CK3 Pro? or are there ones that cant?

Thanks Simon

 

[kadijono]

ck3 pro is for power feed, fits on all drives, but for flashing you need some different tools like the usbpro and probe 3 depending what drive you got

 

[simon00says]

Sorry i meant the ck3 probe.

I have been given a CK3 probe 2 and a CK3 Pro Rev D with all leads

Will this be allright for all the slim xboxes as i want to get one for my daughter and flash it for her?

 

[kadijono]

the ck3 pro is fine works on all drives but the probe 2 is no good for slims.
those drives depends what kind of chipset you got.
either the tx replacment board or sputnick switch or sputnick probe .

and if you are really unlucky and have a winbond chip than the kamikaze trick is the only way.

and a usbpro is a must these days !
i suggest try to read and understand what is written in the guides

 

[demon2011]

I have been given a CK3 probe 2 and a CK3 Pro Rev D with all leads

CK3 Pro Rev D will be fine but probe 2 won't work, probe 3 is used nowadays.

Will this be allright for all the slim xboxes as i want to get one for my daughter and flash it for her?

Also depends on what drive is in your slim, if your unlucky and have the Hitachi 0500 DLN10N or the new Lite-On 1175 DG-16D5S then you won't be able to flash your slim.

 

[bigO73]

You can use the probe 2. Just add a switch to the 3.3v wire and it will do the same thing. Only use the probe that is on the red side not the green. I would post the link but I'm posting from my cell phone. Type in pmt probe 2 in the search and you should find a couple how to's.

 

[hopper47]

You can use the probe 2. Just add a switch to the 3.3v wire and it will do the same thing. Only use the probe that is on the red side not the green. I would post the link but I'm posting from my cell phone. Type in pmt probe 2 in the search and you should find a couple how to's.

probe is useless on slims just fyi as said if you have a winbond chipset then kamikaze all the way if it is mxic then you need sputnik probe or switch to unlock it and that's hoping you don't get a hitachi 0500 or lite on 1175 which have no firmware atm and ck3pro is good for powering the drive but that's all it is designed to do use it along with the x360usb pro and you should be good to go

 

[tsquad131]

agree with hopper probe 3 or probe 2 is useless for slims. you would need a x360usb pro to flash the slim first off then find out what flash chip you have either mxic or winbond then go from there. ck3 pro is fine though for powering up your drive

 

[Ubergeek]

To give a beginner advice by telling them to do the kamikaze hack is reckless and dumb

 

[Ubergeek]

why would you resurrect a post from 3 months ago that has nothing to do with your question and at the same time completely ignore the forum rules ?

use the forums correctly or dont use them at all