Xbox trinity Slim with no power

[difps3]

The console had never been opened or modified its virgin no hack
I opened the console to see about damage points i think all okay
Has anyone ever seen this issue and have any pointers as to where to start looking?

this is photos
http://i.imgur.com/rYCIFBh.jpg
http://i.imgur.com/tJG2hc6.jpg
http://i.imgur.com/ApphWo7.jpg
http://i.imgur.com/aQFNyq9.jpg
http://imgur.com/a/IkSdq#0

 

[daretogo]

The console was working before you opened it?

Then you opened it "to see about damage points" and now it has "no power"?

Or it had "no power" and that's why you opened it?


What exactly do you mean by no power? Does it attempt to come on at all? Do the eject/power buttons still make a sound? Does the power button light up? Fan spin?

 

[360Player90]

Looking at the first picture, The console has been opened and played with

You can see the flux left behind on the nand points

 

[tomma66]

I have had a couple like this and i tried a different rf rol board and that solved the problem,also may be the ribbon on the front faceplate i could be totally wrong though but worth a try if you have a spare rf rol or whole front faceplate.

 

[tomma66]

And agreed there is flux residue left behind i missed that so that well could be the problem.

Someone has been into this.

 

[difps3]

The console was working before you opened it?

Then you opened it "to see about damage points" and now it has "no power"?

Or it had "no power" and that's why you opened it?


What exactly do you mean by no power? Does it attempt to come on at all? Do the eject/power buttons still make a sound? Does the power button light up? Fan spin?

just beep sound and there is no power light ,no fan spin

 

[difps3]

I have had a couple like this and i tried a different rf rol board and that solved the problem,also may be the ribbon on the front faceplate i could be totally wrong though but worth a try if you have a spare rf rol or whole front faceplate.

rf rol board its ok i tested with another one
i try with connect the power sw3g1 its the same problem

 

[difps3]

Looking at the first picture, The console has been opened and played with

You can see the flux left behind on the nand points

i was put the flux without touching any point

 

[360Player90]

i was put the flux without touching any point

So you have read the nand? Post the Jrunner log if so.

Someone has clearly soldered to it though.
http://i.imgur.com/aXKF4ET.jpg

 

[difps3]

So you have read the nand? Post the Jrunner log if so.

Flash Config: 0x00000000
Can not Continue

this is the log

 

[360Player90]

Flash Config: 0x00000000
Can not Continue

this is the log

Can you take a picture of the wiring

 

[SlothGSR]

double check the usb and lan ports for any bent wires grounding out.

 

[Martin C]

Thread closed.

This is not a console repair site - it's for the use of TX users/customers wanting assistance with their products.

Furthermore, do not PM me in future unless you want work carried out by me.