xbox wont boot up just green light :(

[callum]

i tryed the reset glitch on my falcon with a the coolrunner chip i dumped the nand and flashed the ecc i also programmed the coolrunner chip but it wouldnt boot up so i desolderd the coolrunner and put everything back as normal but it still wont boot up any ideas ?

 

[Anobix]

did you flash the old nand back onto it with -w16 <nand>.bin ?

 

[callum]

yes i have wrote the origonal nand back to the xbox but just the middle green light stays on its well baffled me

 

[callum]

so now ive got it to boot up but now i get 3 red lights

 

[esbmaepo]

so now ive got it to boot up but now i get 3 red lights

Did you also remove all the wires to Coolrunner?

 

[callum]

yes ive removed all wires an wrote the origonal nand back but still gets 3 red lights thinking maybe something to do with the nand i dumped

 

[esbmaepo]

yes ive removed all wires an wrote the origonal nand back but still gets 3 red lights thinking maybe something to do with the nand i dumped

And you didn't do anything with the original nand before you flashed it ?

 

[callum]

no i didnt do anything just erased and wrote the original back

 

[esbmaepo]

no i didnt do anything just erased and wrote the original back

Check carefully that you havent damaged a component when removing wires. I does sound that your console has a short. Maybe a damaged resistor or capacitor

 

[callum]

there doesent appear to be any kind of short anywere would it work even if it had the glitch nand installed

 

[esbmaepo]

there doesent appear to be any kind of short anywere would it work even if it had the glitch nand installed

Are you using QSB's for NAND reading? If so are they still installed?

Can you post some close up pics perhaps

 

[josh1095]

had similiar prob on slim. check cpu rst point, even if your not running a coolrunner. try bypassing it. it fixed mine

 

[callum]

i didnt use qsbs i used wires and i think i may of damaged a trace where the orange wire goes on the coolrunner i will check tomorrow as its late thanks for you help guys i will post if thts the problem