RGH Xbox won't boot Xell

[M13k2]

My falcon with i trying to RGH is not booting Xell and the green light on the coolrunner doesn't flash when i check the point the mulitmeter beeps when i check the point.

I have used J-runner
Have CPU
tried to boot with eject:no luck
when i write a random nand that i have because i lost my original nand: get rrod 0022 after 30 usually
When i write ecc is doesn't get the rrod.

 

[Statecowboy]

My falcon with i trying to RGH is not booting Xell and the green light on the coolrunner doesn't flash when i check the point the mulitmeter beeps when i check the point.

I have used J-runner
Have CPU
tried to boot with eject:no luck
when i write a random nand that i have because i lost my original nand: get rrod 0022 after 30 usually
When i write ecc is doesn't get the rrod.

First - pics of your soldering.

 

[M13k2]

some of them are alternative points and they are under the GPU and i can't get to them now but one or two pads have been lifted because i think the guy i sent the xbox lifted one of them and end up using a alternative point without fixing the pad

 

[Statecowboy]

some of them are alternative points and they are under the GPU and i can't get to them now but one or two pads have been lifted because i think the guy i sent the xbox lifted one of them and end up using a alternative point without fixing the pad

Sorry bud, you still need to post pics. BTW, your thread will be closed if you don't, so better hurry.

If you know there are lifted pads, then chances are you may need to repair them. Lucky for you, as soon as we have pics I'm sure you'll get some good tips.

 

[M13k2]

http://img560.imageshack.us/img560/2893/sam0580k.jpg

http://img442.imageshack.us/img442/2788/sam0579f.jpg

http://img543.imageshack.us/img543/424/sam0572a.jpg

http://img36.imageshack.us/img36/1760/sam0568c.jpg

http://img141.imageshack.us/img141/2465/sam0567x.jpg

I tried my best to get the picture but i will trwm take out the x clamp and post pictures

 

[Statecowboy]

Wow...those are fuzzy but I can already tell you have some clean up to do. Also, where is POST_OUT going (yellow wire)?

 

[M13k2]

i think it under the heat sink or somewhere does it really matter about the lifted pads cause i really am not paying anymore on this xbox

 

[Modz Inc]

remove all that wiring you got there and neaten it up, think u got the yellow wire on a wrong point or something

 

[M13k2]

i will check i think it going under the heat sink

 

[Statecowboy]

i think it under the heat sink or somewhere does it really matter about the lifted pads cause i really am not paying anymore on this xbox

Wow

 

[M13k2]

i just really don't know what yo do anymore with this xbox i have been working on it since march 24 and like i already spent a ton of money

 

[Statecowboy]

Look man, there are some pretty smart dudes on this site. In order for them to help you not waste any more money, there are certain things you need to do. First and foremost is posting good quality pictures. This will help identify issues you may not be aware of that others have encountered repeatedly.

Don't lose heart just yet.

And if you dont know what I mean by good pics, take a look at this...

http://www.team-xecuter.com/forums/showthread.php?t=79402

 

[M13k2]

i will upload pictures of everything trwm i just want this xbox to go to waste i hope these lifted pad or whatever they are don't need repair

 

[QcMarque]

if you have lifted pads, chances are they will need repair (depending on WHICH pads are lifted) however, as statecowboy said... we have some awesome people around here that are willing to help if you help them help you. So no worries, we'll do what we can to assist

also, if you get 0022 after about 30 seconds (imsc) then you have the wrong LDV values.