Xbox wont ftp

DabbaDoo

Junior Member
May 16, 2004
22
0
Ok, I have some wierd sh*t going on. I tried to ftp to my box and it wasnt working. So I reset my router and it still didnt work. I tried a different cable and it still didnt work. FTP will not work on X3, EvoX, or Ava. Everything is up to date as well. The wierd thing is when i turn DHCP off on Ava and look for my friends xbox it will let me connect to it through the file explorer but I still cant connect to it with my computer. I have tried changing my IP several times. Does anyone have any idea whats going on?
 

mobomelter

Senior Member
Dec 6, 2004
115
0
Maryland
it depends on how you are connecting it.... are you connecting to through your router or directly through your computer? also try using flashfxp and being in the x3 bios not a dashboard.
 

DabbaDoo

Junior Member
May 16, 2004
22
0
I'm connecting through my router. The router has been set to defaults and its giving the xbox an ip fine. I have been using flash fxp, and it wont work in the x3 bios.
 

Telexen

VIP Member
May 27, 2004
532
0
might be a stupid router blocking FTP connections ... look through it's settings.
 

badaktor

Senior Member
May 17, 2004
114
0
Tx
very true, especially if you reset it, depending on how your network is setup, and what router/s you have, try logging into the router, and see if its blocking anything, troubleshoot the router first, be sure to check all of your settings in x3 Live

I use cuteftp, and smartftp, and get great upload/download times
 

tjoff

Junior Member
Dec 21, 2002
13
0
Liteon LT+ Dilemma

Needs a bit fo simple advice.

Have 7 Series Liteon : Flashed that with iXtreme 1.51 in the past. Still have copies of these files: Dummy.bin, Identify.bin, Inquiry.bin, key.bin and LTCFW.bin.

Cannot recall but i then upgraded it to Liteon LT - i did not know how to use the above files but do recall reading JF tutorial and flashed it and it worked. I do have a folder with the following files: Dummy bin and then LT files for drive version 7, 8 and 9 and a folder which says Leteon Orig (These have similar files BUT i am damn sure they are not MY orig files.... but rather ones that need the key to be inserted incase one wants to flash vback to stock)

My QUESTION:

Following JF tutorial I DO NOT WANT TO DO MRA hack. Which files do i use to say that i have the drive key...!

Answer as informative as possible. Its been a long time since i last did any flashing..! But i am reading the JF tutorial again.
 

tjoff

Junior Member
Dec 21, 2002
13
0
Re: Liteon LT+ Dilemma

dont worry. i reckon i can use the dummy.bin and then see if ican find it in the drive database. if it matches then its all cool.

ONE QUESTION: Now that i have hte latest jungle flasher as well, how does the latest jungle flasher know about the drive database..? Or shall i use the old one and just manully load the correct LT+ firmnware..?

thanks
 

GhostBox

Senior Member
Nov 17, 2003
155
0
Re: Liteon LT+ Dilemma

you should still have a file in that lot LTOFW.bin this is the original firmware. Load that as source in Jungleflasher latest version and if you have the latest firmware pack installed within the firmware folder in Junglef then it should say do you want me to load firmware hit yes and you should have lite touch+ make sure you have the correct key though..I'd also suggest reading the newest Junglef Tutorial so you cover all bases and get it right first time..