I can't installed the drivers for my xboxusb pro because when I plugged it in, it say unregconizable device and won't let me installed the driver. The LD1 keep flashing green light and the LD2 keep flashing red light. And the LD5 always stay on green if that help. Maybe I should return and ask for a new one. Just my luck.
Xboxusb pro defective or something else
- Thread starter extinction
- Start date
Martin C
VIP Member
Try it on another computer.
Failing that, put it into bootloader mode (switch set to 'on') and plug in, then try to update the firmware.
Failing that, put it into bootloader mode (switch set to 'on') and plug in, then try to update the firmware.
I tries it on 3 different computers and 5 different usb wire and ports. Yes is on off mode and also tries on mode as well. I installed the driver fine at the beginning and update the firmware to 1.8. Plug it in and started JF and it won't see it. And from there none of my computers regconize the device. Didn't flash any drive yet since JF didn't see it. Now all it show up is unregconizable device and it won't let me installed the device driver or uninstalled it either. And I don't see it in the device manager either.
Martin C
VIP Member
When you hold the reset button, does the device disconnect from your computer? (You should hear the disconnect and the unknown device should vanish from Device Manager).
No when I press the reset button, the unknown device still there and the xbox360usb power light (LD1) turn green and stay that way, and the LD2 light turn off. I press the reset like a hundreds time and nothing seem to help.
Uninstall it completely using the standard proc, and reboot. and the reinstall it again using the guide on x360 usb pro website after identifying your OS.
Happened to me once, had to uninstall it completely.
If all else fails get a replacement if under warranty. I am not sure u get a warranty with it. Worth checking with your reseller.
Happened to me once, had to uninstall it completely.
If all else fails get a replacement if under warranty. I am not sure u get a warranty with it. Worth checking with your reseller.
Martin C
VIP Member
I've seen this before - I helped a guy via TeamViewer who had the same issue.
Sorry to say but I think your device is faulty - at the very least when you hold the reset button it should disconnect the device from the machine.
Contact your reseller and get a replacement.