XeBuild 1.00

I

ideloera

Full Member
Oct 12, 2011
73
0
Chicago
Hi guys.

Well, I RGH my Jasper 256 about 3 weeks ago and it has been working like a champ. The only trouble I came across was when creating the ggbuild image. I only dumped 64MB out of the 256MB (dumping 256MB would take about 40min per dump), so when trying to build the image using command line I would get errors as my console is a Jasper 256 with only 64MB dumped (with no errors/bad blocks).

To remedy that issue is used Rogero's 360 Multibuilder to build my ggbuild image and it worked like a charm.

Now that XeBuild 1.00 (hotfix 1) is out I want to create the image using command line, but I come across the same problem that I had previously when choosing my console and thus cant create the image. I guess I will have to wait till Rogero releases a new 360 multibuilder, but in the mean time... does anyone know what parameters to enter for console when building a XeBuild image (or gg image) when your system is a BB Jasper, but used 64MB rather than 256 or 512 when the nand was dumped?

currently this is what I input:
xeBuild.exe -t glitch -c Jasper256 -d mydata -f 14699

I've tried many diff possibilities for -c (Jasper256, Jasper64, Jasper, blank, etc and also modified the options.ini file to reflect my selection) but with no success.

Thanks!
 
J

joelj

VIP Member
Jun 12, 2011
194
0
Colombo, SriLanka
ideloera said:
Hi guys.

Well, I RGH my Jasper 256 about 3 weeks ago and it has been working like a champ. The only trouble I came across was when creating the ggbuild image. I only dumped 64MB out of the 256MB (dumping 256MB would take about 40min per dump), so when trying to build the image using command line I would get errors as my console is a Jasper 256 with only 64MB dumped (with no errors/bad blocks).

To remedy that issue is used Rogero's 360 Multibuilder to build my ggbuild image and it worked like a charm.

Now that XeBuild 1.00 (hotfix 1) is out I want to create the image using command line, but I come across the same problem that I had previously when choosing my console and thus cant create the image. I guess I will have to wait till Rogero releases a new 360 multibuilder, but in the mean time... does anyone know what parameters to enter for console when building a XeBuild image (or gg image) when your system is a BB Jasper, but used 64MB rather than 256 or 512 when the nand was dumped?

currently this is what I input:
xeBuild.exe -t glitch -c Jasper256 -d mydata -f 14699

I've tried many diff possibilities for -c (Jasper256, Jasper64, Jasper, blank, etc and also modified the options.ini file to reflect my selection) but with no success.

Thanks!
Click to expand...
what is the 1BL key that you used is it the previous one??? can you share it with us...
 
A

afiser

Senior Member
Jul 7, 2005
126
0
google "1blkey xbox 360" and your answer should be within the first few results.
 
seanr28

seanr28

VIP Member
Mar 7, 2004
1,203
0
word of warning, I have just installed the avatar update and now it does not boot anymore...... will report back in a bit...

---------- Post added at 09:04 ---------- Previous post was at 08:59 ----------

ok this is strange, but anyway, after powering off for a few minutes it works fine again! so no issues.
 
G

GSIBOY

VIP Member
Nov 30, 2011
534
33
Cape Town
seanr28 said:
word of warning, I have just installed the avatar update and now it does not boot anymore...... will report back in a bit...

---------- Post added at 09:04 ---------- Previous post was at 08:59 ----------

ok this is strange, but anyway, after powering off for a few minutes it works fine again! so no issues.
Click to expand...

Thanks for keeping us posted Seanr28, Will test when i get home
 
dogeatdog

dogeatdog

VIP Member
Feb 3, 2011
248
0
Netherlands
Good news all around. I do wonder however, the dae.bin extensions, which were in the silent update on 13604 and must also be in the 14699, have they been rendered inactive/removed in the modified dash ? Or should we wait for LT 3.0 to play AP 2.5 backups from DVD on our RGH's. (I know .. why should you when you have a hdd attached.. but some customers are .. weird .. :)).

---------- Post added at 02:20 ---------- Previous post was at 02:17 ----------
seanr28 said:
word of warning, I have just installed the avatar update and now it does not boot anymore...... will report back in a bit...

---------- Post added at 09:04 ---------- Previous post was at 08:59 ----------

ok this is strange, but anyway, after powering off for a few minutes it works fine again! so no issues.
Click to expand...
You installed this how ? Just downloaded the official MS update, renamed to $$.. and put it on an USB stick ?
 
seanr28

seanr28

VIP Member
Mar 7, 2004
1,203
0
dogeatdog said:
Good news all around. I do wonder however, the dae.bin extensions, which were in the silent update on 13604 and must also be in the 14699, have they been rendered inactive/removed in the modified dash ? Or should we wait for LT 3.0 to play AP 2.5 backups from DVD on our RGH's. (I know .. why should you when you have a hdd attached.. but some customers are .. weird .. :)).

---------- Post added at 02:20 ---------- Previous post was at 02:17 ----------



You installed this how ? Just downloaded the official MS update, renamed to $$.. and put it on an USB stick ?
Click to expand...
correct, I dont use the DVD drive as everything is on the internal hard disk, so dashlaunch takes care of any ap25 etc...
 
dogeatdog

dogeatdog

VIP Member
Feb 3, 2011
248
0
Netherlands
seanr28 said:
correct, I dont use the DVD drive as everything is on the internal hard disk, so dashlaunch takes care of any ap25 etc...
Click to expand...
Thanks, will be playing around with this tonight then :)

Metro dash is ugly as hell though, might take some time to get used to for me :eek2:

(love the avatar btw, Carmageddon.. good times :))
 
seanr28

seanr28

VIP Member
Mar 7, 2004
1,203
0
one other that i came accros, was the instructions supplied with XeBuild state that you can use your old freeboot image to create the new freeboot image, this did not work for me and I ended up using my stock nand image and it worked.
 
You must log in or register to reply here.