Xecuter 2.6 CE After Installation

[neddy]

Hey Guys,

I am new to this but I have recently purchased a XAPT3R Xecuter 2.6 CE Combo from Baldbouncer. i know that Bank One Has Cromwell Version 3.01 Bank 2 Has Cromwell Version 3.03 To cover All Released Xbox Versions At This Time Up To And Including Xbox Board Version 1.6b Also Included Free The LPC Rebuild Kit For Xbox Board Versions 1.6 & 1.6b i have version 1.1 is there anything else i need to do to start playing my backup games or does it need flashing ?

 

[Martin C]

Read the tutorials!!!! You need to flash your chip with a hacked BIOS.

Martin

 

[neddy]

Sorry can you give me a quick link so i can find one i am a real begginer sorry

 

[Martin C]

There are tutorials in my sig.

Martin

 

[neddy]

IS this dangous?
will it distory my orignal xbox?

 

[Cra41g]

IS this dangous?
will it distory my orignal xbox?

If you do it wrong, you could kill the chip or your Xbox. Read the tutorials, and follow what they say - if you do everything correct, then all should be well.

In a nutshell:

1. Install the chip
2. Flash the chip with a hacked BIOS (Make a BIOS CD)
3. Install a dashboard (Make an EvoX boot CD/connect to the Xbox using FTP program)

There are guides for all of the above available, either in MartinC's sig, the homepage of teamxecuter.com, or www.xbox-scene.com

 

[smokingmods]

yup you sure can kill a fine xbox, if in doubt ship it out, pay a pro to do the work for you. plenty installer section on the forum, find one near you if you are afraid of killing that xbox

 

[uofuguy]

hey i was wondering if anyone could help me....I have installed a xecuter 2.6 ce chip and flashed it with evo x....everything works fine....but now I dont know what to do next...i have heard that i am supposed to download a dashboard.....supposedly evolution x? and then i have heard i need to upgrade my hard drive through my computer....is this right? and i have also heard that some chips cant save games that you just go out and rent or have.....is this true? any help would be very much appreciated. thanks!!!!

 

[Martin C]

hey i was wondering if anyone could help me....I have installed a xecuter 2.6 ce chip and flashed it with evo x....everything works fine....but now I dont know what to do next...i have heard that i am supposed to download a dashboard.....supposedly evolution x? and then i have heard i need to upgrade my hard drive through my computer....is this right? and i have also heard that some chips cant save games that you just go out and rent or have.....is this true? any help would be very much appreciated. thanks!!!!

Why not read the FAQs and tutorials ??

Martin

 

[hollywood181]

When you say that "everything works fine", what exactly do you mean? What screen are you at? Flashbios, Evolution X, something else?

 

[uofuguy]

I meant that if I turn it on it doesnt frag or anything it just comes up to the regular screen when there is no cd in the xbox. If i put a game in I can play it.....when its loading up it is just the regular screen with evo x in the top left corner...i was just wondering if I need to get a dashboard to be able to save games to the hard drive.

 

[Cra41g]

I meant that if I turn it on it doesnt frag or anything it just comes up to the regular screen when there is no cd in the xbox. If i put a game in I can play it.....when its loading up it is just the regular screen with evo x in the top left corner...i was just wondering if I need to get a dashboard to be able to save games to the hard drive.

Going by what you wrote previously, you successfully flashed your chip - you now need to make a dashboard boot cd (best bet is EvoX). Make the disc, and load the disc with your chip enabled - EvoX should load, if you've made the cd correctly.

Once EvoX loads, you can FTP into your Xbox and configure everything from there. You need to transfer a dashboard to you hard drive - you'll also need to configure the x2config.ini file to load the correct dash. DVD2Xbox is one programme you'll need for what your main goal is - does exactly what it says on the tin!