Xecuter 2.6 CE Bios Problem

H

HotBox

I'm new to this, and I accidentally loaded x2 5035 to bank 1 of my chip,
when I power the Xbox (Version 1.6) up with the chip enabled it shows that "xecuter live config is loading" and that "xecuter rox my box"
however it only boots up to the MS dashboard. I figure I missed something when loading my bios, and I can't boot to a flash bios.
So I'm bassically wondering what my options are to fix my problem.

Thanks in advance
 
D

DJBOOBY

VIP Member
Sep 24, 2005
5,354
0
Australia
have you installed a dash if you have you will have to edit the x2 config file to boot to dash then ftp to E:/ folder of xbox
avalanuch dash is used here

eg
; 255 characters max here, format is <drive>:<path_to_xbe>.xbe, e.g. "f:dashes\avalaunch.xbe"
dash1Name = e:avalanuch.xbe
dash2Name = e:evoxdash.xbe
dash3Name = c:unleashx.xbe
dash4Name = c:xbmc.xbe
dash5Name = c:xboxdash.xbe


if not then your xbox is working 100% x2 dose not have a config dash
 
H

HotBox

I would like to know how to install a dash, considering I really have no options once it powers up.
 
C

catogtp

VIP Member
Dec 26, 2003
248
0
you need to do some searching on google for creating a bootdisk. What you'll have to do it create one of those boot disks and ftp your dashboard over. You could use an installer disk but you wont learn anything....then when something breaks you have no clue what to do to fix it.
 
You must log in or register to reply here.