xecuter 2.6, flash bios screen freezes, error 16 when booting 2 msdash

[tyrantakat]

Hi,
I have a v 1.6 xbox and installed an xecuter 2.6 chip with lpc rebuild. When I power on the xbox the blue light shows up as well as the flash bios screen, but then freezes. When I turn the chip off it boots to msdash with error 16, green and red flashing lights on eject button.

I have checked solder points several times, and was wondering if the xbox is supposed to boot normal with the lpc rebuild and header pins installed (but the chip removed... I am assuming not?) I was also wondering if anyone had an idea to which pin may be causing this if any, an lpc or d0?

Thanks if anyone can help! Tay

 

[Fantmx]

Freezes on Flashbios? Use the standard Microsoft controllers, and you will be able to navigate the menu. Flashbios won't allow you to do anything buy flash a new bios to the chip.

As for error 16, did you put a new hard drive in the Xbox or anything like that?

 

[tyrantakat]

i have tried the other controller, and other ports, as for flash bios i cannot navigate the menu after it detects my hard drive and dvd-rom. And yes, I installed a 160 gig WD.

 

[MKChampion]

because its a new hdd thats where the error 16 is coming from because it can't set the clock since you have nothing on the new hdd
if haven't made a backup of your original hdd then i believe you can rebuild using slayer's

make sure the controller ports' plug is connected properly to the motherboard socket

 

[SYNCMASTER]

And if you wil be able to boot up to you M$ dash, you have to lock your HDD!

 

[tyrantakat]

how do I lock the HD? does that mean i have to unlock it every time i copy games.

 

[SYNCMASTER]

No, when you lock your hdd, you can access the m$ dash without booting with your chip. You can still copy and play your games from your dashboard...

 

[Fantmx]

Lock your dash with ConfigMagic.

 

[SYNCMASTER]

You mean lock your hdd with Configmagic.....

 

[Fantmx]

Opps... Yeah, that's what I meant.