Hello,
Let me start off by saying I am a complete and utter xbox newb lol. Consider that my disclaimer for any ignorance displayed herein.
I have a xecuter 2.3 lite that is properly functioning that I bought a year ago, so I thought I'd use the same flash disc that I used for it, for one I recently purchased for a friend which is a xecuter 2.6 lite. I forgot the exact process of flashing, so being a moron, I just plugged the disc in.
I get the blue screen that allows you to select what you want to do next, at this point I forgot you could select these with a controller, so I thought I had to reboot it with the disc in it. At this point the screen turned black and the light around the eject button turned orange and the disc would not eject. So I turned the chip off and rebooted and the disc ejected just fine, but the bank1 startup screen is now black and holds onto whatever cd is in it until I reboot with the chip off.
Bank 2 is still functioning with the blue screen, can I fix bank 1 somehow, or does it not matter as long as bank 2 works?
Now when I tried the same disc under bank 2 and selected flash bios, it simply said waiting for drive for about 3 minutes then ejected and said insert disc again without doing anything. Is this because whatever cromwell I had on there is no longer functioning for this model of chip, or is it a matter of the xbox version?
If someone could tell me exactly what bios to download/burn for this particular chip I would be greatly indebted. I just want basic Cromwell, no evox or slayer's autoinstaller or anything else that might unnecessarily confuse me
. I got it to work on my other xbox, this is proving quite infuriating . I'm not sure what the version is, but I _just_ bought it from xbox-modchips.com, so I assume it's rather new.
Thanks in advance
Let me start off by saying I am a complete and utter xbox newb lol. Consider that my disclaimer for any ignorance displayed herein.
I have a xecuter 2.3 lite that is properly functioning that I bought a year ago, so I thought I'd use the same flash disc that I used for it, for one I recently purchased for a friend which is a xecuter 2.6 lite. I forgot the exact process of flashing, so being a moron, I just plugged the disc in.
I get the blue screen that allows you to select what you want to do next, at this point I forgot you could select these with a controller, so I thought I had to reboot it with the disc in it. At this point the screen turned black and the light around the eject button turned orange and the disc would not eject. So I turned the chip off and rebooted and the disc ejected just fine, but the bank1 startup screen is now black and holds onto whatever cd is in it until I reboot with the chip off.
Bank 2 is still functioning with the blue screen, can I fix bank 1 somehow, or does it not matter as long as bank 2 works?
Now when I tried the same disc under bank 2 and selected flash bios, it simply said waiting for drive for about 3 minutes then ejected and said insert disc again without doing anything. Is this because whatever cromwell I had on there is no longer functioning for this model of chip, or is it a matter of the xbox version?
If someone could tell me exactly what bios to download/burn for this particular chip I would be greatly indebted. I just want basic Cromwell, no evox or slayer's autoinstaller or anything else that might unnecessarily confuse me
. I got it to work on my other xbox, this is proving quite infuriating . I'm not sure what the version is, but I _just_ bought it from xbox-modchips.com, so I assume it's rather new.Thanks in advance