Xecuter Fusion v1.07 Beta (REPACK) Released

[WNYConsoles]

Re: Xecuter Fusion v1.07 Beta Released

Am I missing something because I cannot see how to extract smc_config.bin in J-Runner. The only thing I see is I can view it.

 

[jsinger47]

Re: Xecuter Fusion v1.07 Beta Released

Putting it on my hdd isnt a problem, its running it. Is there an xex or something?

i think now would be a good time for you to look into the install instructions and the information i've given you

if you are smart, you will put the information together and be able to figure out what you are doing

i can't tell whether or not you possess the general concept of what Fusion is, and how it is installed

---------- Post added at 23:35 ---------- Previous post was at 23:33 ----------

Am I missing something because I cannot see how to extract smc_config.bin in J-Runner. The only thing I see is I can view it.

advanced/extract files

look for smc_config.bin in the output folder of j-runner

 

[aarongdl]

Re: Xecuter Fusion v1.07 Beta Released

Common TX Forum User being an arse. I do know what Fusion is, I'm just asking if it's possible to execute the .iso without a dvd drive. I'm aware I have to flash a new nand image, and to get it working I have to execute the files on the bootdisk. Tell me an alternative if I don't have a DVD Drive? Christ.

 

[WNYConsoles]

Re: Xecuter Fusion v1.07 Beta Released

Ahh, output folder. I assumed it would go to the console serial number folder.

Thank you

 

[jsinger47]

Common TX Forum User being an arse. I do know what Fusion is, I'm just asking if it's possible to execute the .iso without a dvd drive. I'm aware I have to flash a new nand image.

If you read what I said and my "update notes" from my testing, you'd see an ISO isn't required. I already told you this. Also "common Tx forum user". Lol. Read the fusion release notes.

If spelling error, I blame Tapatalk.

 

[aarongdl]

Re: Xecuter Fusion v1.07 Beta Released

Sorry didnt read your update notes, nor did I see em. My bad man.

 

[jsinger47]

Ahh, output folder. I assumed it would go to the console serial number folder.

Thank you

It took me a second too

If spelling error, I blame Tapatalk.

 

[WNYConsoles]

Re: Xecuter Fusion v1.07 Beta Released

Hmm, this is odd. I cannot get the image to boot right. I created correctly, flashed it, booted it up and it glitches oddly with debug running when the system already glitched (Optical lighted up), then controller with connect but it continues to debug.

1/5 attempts I got the TX Boot Disc screen for about 3 seconds then it went to no signal. Not sure what the problem is but I am dying to try this out.

 

[FreakAlchemist]

Re: Xecuter Fusion v1.07 Beta Released

Alright time to set off.Thanks TX

 

[webnomix]

Re: Xecuter Fusion v1.07 Beta Released

If you read what I said and my "update notes" from my testing, you'd see an ISO isn't required. I already told you this. Also "common Tx forum user". Lol. Read the fusion release notes.

If spelling error, I blame Tapatalk.

LOL, that was funny, right there.

Kudos, and thanks for all the effort - will be having a play when I get home from work (but have already downloaded, built the iso and played with the exe, all on the companys dime:cool2:

 

[jsinger47]

Re: Xecuter Fusion v1.07 Beta Released

Hmm, this is odd. I cannot get the image to boot right. I created correctly, flashed it, booted it up and it glitches oddly with debug running when the system already glitched (Optical lighted up), then controller with connect but it continues to debug.

1/5 attempts I got the TX Boot Disc screen for about 3 seconds then it went to no signal. Not sure what the problem is but I am dying to try this out.

did the install screen appear, then go black?
if so, its done installing, and you just have to wait for it to boot (take the disc out)

from there, just wait for it to glitch
when you see the controller connect (top left ROL), the fusion boot animation should not be far behind

 

[Crazywhitie]

Re: Xecuter Fusion v1.07 Beta Released

yeah made for Trinity not booting right too.. Extract file with Jrunner. it's called SMC.bin not smc_config.bin though <--------WRONG ignore me

 

[WNYConsoles]

Re: Xecuter Fusion v1.07 Beta Released

yeah made for Trinity not booting right too.. Extract file with Jrunner. it's called SMC.bin not smc_config.bin though

It's SMC_config.bin, in the output folder in J-Runner directory.


So who's today's forum idiot, ME! I forgot to plug in the hard drive LOL. It's installing now.

 

[LoneWolf913]

Re: Xecuter Fusion v1.07 Beta Released

LOL, that was funny, right there.

Kudos, and thanks for all the effort - will be having a play when I get home from work (but have already downloaded, built the iso and played with the exe, all on the companys dime:cool2:

Isn't that the best way to do it? On company time? :tongue:

On topic: Gonna glitch this Jasper Elite in the morning, will see how Fusion behaves on it. Got high hopes.

So who's today's forum idiot, ME! I forgot to plug in the hard drive LOL. It's installing now.

You have no idea how many times I've done that booting my dev box, forgot to plug up the hard drive..black screen and a freak-out until I notice it sitting on my desk.

 

[jsinger47]

Re: Xecuter Fusion v1.07 Beta Released

yeah made for Trinity not booting right too.. Extract file with Jrunner. it's called SMC.bin not smc_config.bin though

make sure you have the newest J-Runner

the config blocks are, in fact, smc_config.bin for trinity mobos

if you don't use the correct config blocks, fusion will not work

 

[Crazywhitie]

Re: Xecuter Fusion v1.07 Beta Released

It's SMC_config.bin, in the output folder in J-Runner directory.

DAm ok thx, will try I thought it put it in the Nand folder ... Thx

 

[WNYConsoles]

Re: Xecuter Fusion v1.07 Beta Released

Am I incorrect but shouldn't Family Settings be Firmware Settings? When I launch dash it still says Family Settings and says "Currently Unavailable".

 

[Ubergeek]

Re: Xecuter Fusion v1.07 Beta Released

Common TX Forum User being an arse. I do know what Fusion is, I'm just asking if it's possible to execute the .iso without a dvd drive. I'm aware I have to flash a new nand image, and to get it working I have to execute the files on the bootdisk. Tell me an alternative if I don't have a DVD Drive? Christ.

That attitude will get you no where. fast. For your information joesinger47 is on the Demon and Fusion test teams so pissing on him like that just makes you look a twat

he also gave you the correct info if you had bothered to read instead of getting your panties in a twist.

 

[Ubergeek]

Re: Xecuter Fusion v1.07 Beta Released

Guys, there isnt a way to do this via ftp or usb is there?

I dont have a drive on my falcon rgh. my laser is dead.

you can extract the files to hard drive directly

 

[jsinger47]

Re: Xecuter Fusion v1.07 Beta Released

Am I incorrect but shouldn't Family Settings be Firmware Settings? When I launch dash it still says Family Settings and says "Currently Unavailable".

Firmware Settings are accessed through the miniblade, or whatever its called.