i need help i turn on my xbox after i write my ecc then i turn on my xbox to get my cpu and it does not want to load to xell i turn on the xbox by pressing the dvd button
RGH Xell help
- Thread starter HeLL HAZARD13
- Start date
What command did u use to write the ecc what program did u use to make the ecc more info please
Sent from my LG-P920 using Tapatalk
Sent from my LG-P920 using Tapatalk
Are u using nandx? Try using multibuilder for ur ecc and make sure ur using the +w command when writing it. My knowledge is limited but a mod be able to help u more
Sent from my LG-P920 using Tapatalk
Sent from my LG-P920 using Tapatalk
to beable to boot into xell you need to hit your dvd eject button then xell should load an did you program your coolrunner first an do the install wires an all..
---------------------------------------------------------------------------------------------------------------------------------------------
What tut are you going by..........
an i recommend this tut HERE
---------------------------------------------------------------------------------------------------------------------------------------------
What tut are you going by..........
an i recommend this tut HERE
Last edited:
Goldensavage
VIP Member
First of all some details.
What motherboard
What Nand reader
What glitch chip
Pictures of soldering
Have you programmed the coolrunner, if so what, using what
What dashboard are you on
Have you tried multibuilder to create your ecc
And we cannot just give out the command to write the ecc, as we don't know what mobo you have.
What motherboard
What Nand reader
What glitch chip
Pictures of soldering
Have you programmed the coolrunner, if so what, using what
What dashboard are you on
Have you tried multibuilder to create your ecc
And we cannot just give out the command to write the ecc, as we don't know what mobo you have.
Thanks bro after taking a look your right i edited my post so i am not giving the wrong info thanks:wink:
i have a falcon
im useing nand x
glitch chip is cool runner
my solder is good idk
i dont think i programed the coolrunner
and i started to use multibulder and i put my nand is the data/my360 and i named my nand "nanddump.bin" and it says that i did not put my nanddump.bin in the data/my360 folder ???
x360ccm
BANNED
Ok you need to program your coolrunner first install your wires on you MOBO then you will be able to load into xell via eject button just follow this GUIDE HERE here an you will be set......
ok i did that and it worked but when i press enter and its suppose to write the ecc and i press enter this is what it says
found 4bl<build 8453 > at 00011340
found 15bl <build 65535 > at 00017340
and the press any key then it exits ????
Martin C
VIP Member
Goldensavage
VIP Member
Also, the 360 will not glitch if you haven't programmed the coolrunner.
http://team-xecuter.com/forums/showthread.php?t=76193
See this guide and follow it.
Keep your original nands safe. That error you get from Multibuilder is not unique is strange. Are you sure that the nanddump you are using is your original nand read
http://team-xecuter.com/forums/showthread.php?t=76193
See this guide and follow it.
Keep your original nands safe. That error you get from Multibuilder is not unique is strange. Are you sure that the nanddump you are using is your original nand read