So, I just built another Trinity RGH, and I used JRunner for everything(AWESOME, BTW). The glitch image built by JRunner produced a blue screen Xell Reloaded. So I tried 360 multi builder v0.7 to build my 14699 glitch image. Wrote that to console, I get black screen Xell Reloaded. When I boot console it forever glitches, with no success.
Xell Reloaded boots, but console glitches unsuccessfully
- Thread starter AteOeight
- Start date
So, I just built another Trinity RGH, and I used JRunner for everything(AWESOME, BTW). The glitch image built by JRunner produced a blue screen Xell Reloaded. So I tried 360 multi builder v0.7 to build my 14699 glitch image. Wrote that to console, I get black screen Xell Reloaded. When I boot console it forever glitches, with no success.
x360ccm
BANNED
It's at somewhere between 47-50cm, I assumed it was my coil. I wanted a confirmation... guess I'll tuck coil under xclamp.
x360ccm
BANNED
I was just going to say that the "tucking it under the X-clamp" has always worked great for me.
As dgenx stated, I only taped it down in one area too.
Yea, I hear ya... was just being hopeful of it working like this. I will move coil tonight and post results.
Martin C
VIP Member
Stop - does it boot to xell every time?
If so, it might be something else causing the non-booting. Have you checked your LDV? Any chance you manually set it in multi_builder?
If so, it might be something else causing the non-booting. Have you checked your LDV? Any chance you manually set it in multi_builder?
I didn't put any info into options.ini txt. Therefore I haven't changed my LDV, LDV was 5 before/after new build.
Unless you dumped your nand after a official M$ update your going to have to bump your LDV up one when building a new nand. In actuality you dont even have to provide a correct nanddump for multibuilder as long as you modify the options.ini file with your boards correct values, cpu key, dvd key, ldv etc......
Last edited:
Martin C
VIP Member