Xell Wont boot.

Try updating it to XeLLous and see if it works.
 
Quote from big_ted's tutorial:

big_ted said:
now to write xell to the nand and get the cpu key, you will need
xell for your motherboard revision
xellous (keeps it easy for noobs)

flash xell (free60 version)to the console you are flashing a file approx 1.3mb in size double check this before you start flashing so not to overwrite the rest of the nand.
MAKE SURE TO HAVE THE VERSION FOR YOUR BOARD

zephyr would be
nandpro usb: -w16 zephyr_hack_updxell.bin 0

xennon would be
nandpro usb: -w16 xenon_1921hack.bin 0

big block jaspers (edit the 256/512 to suit)
nandpro usb: -w256/-w512 jasper_6723_hack_for_256mb_512mb.bin 0

etc...

update the xell with xellous
open the xellous rar image and extract xell-1f.bin

nandpro usb: +W16 xell-1f.bin 40

once this is done remove the power cord and wait 30 seconds or so,
plug in the composite av lead and the network cable,
If it has worked correctly then after the blue screen with writing you should see at the bottom the cpu key

once you have the info power down the console.
As for XeLL and XeLLous, you can get them from Xbins. Search for Auto Xbins.
 
You are using Cygnos ?
 

Om3ga Sn1per

Noob Account
Jul 15, 2010
6
0
I ended up using Cygnos to install XBR, I had to jump through some hoops, but unless you have a cygnos, my information is useless.