Xellous Doesnt Get Dvd Key

[KyleT713]

Whenever i go into Xellous it doesnt give me my dvd key but it gives me my CPU. This is what it looks like

! ! kv_get_dvd_key Failure: kv_read kv_get_dvd_key Failure: kv_read
! ! the hash check failed probably as a result of decryption failure the hash check failed probably as a result of decryption failure
! ! make sure that the CORRECT key vault for this console is in flash make sure that the CORRECT key vault for this console is in flash
! ! the key vault should be at offset 0x4200 for a lenght of 0x4200 the key vault should be at offset 0x4200 for a length of 0x4200
! ! in the 'raw' flash binary from THIS console console in the 'raw' binary flash from THIS
__________________________________________________________

2nd problem is whenever i try to flash my old nand, a freeboot image or xbr i get 2 rrod. and Xellous is the only thing that will come up when and it gets that.. so if anyone can help me please post in this thread..

im not that experienced with jtags bc i didnt jtag this console my self so if you could please help me that would be great and i might give you a cash reward becuase i miss my jtag.

 

[BGAMods]

does it show your fusesets? also 2 red lights is normally an overheating issue. next time it does it find the secondary error code.

 

[KyleT713]

yes it shows the fusesets.. and it only gets two red rings when i flash xbr or freeboot.. and the secondary code is 0011 which is the heatsyncs..

 

[M AzeeM K]

Your Xbox360 definitely has a overheating issue. How long does XeLLous stay on after you have turned on the console?

 

[BGAMods]

0011 is the cpu overheating. if youve got your cpu key then you can get your dvd key in 360 flash tool. load your nand and then add your cpu key and itll decrypt and give the dvd key.

not sure why the 2 red lights only show when you boot xbr, freeboot or original nand. m azeem k might be able to help a bit more. im sure hell jump on and help mate.

EDIT:

there you go i knew he would lol.

 

[KyleT713]

Whenever i go into Xellous it doesnt give me my dvd key but it gives me my CPU. This is what it looks like

! ! kv_get_dvd_key Failure: kv_read kv_get_dvd_key Failure: kv_read
! ! the hash check failed probably as a result of decryption failure the hash check failed probably as a result of decryption failure
! ! make sure that the CORRECT key vault for this console is in flash make sure that the CORRECT key vault for this console is in flash
! ! the key vault should be at offset 0x4200 for a lenght of 0x4200 the key vault should be at offset 0x4200 for a length of 0x4200
! ! in the 'raw' flash binary from THIS console console in the 'raw' binary flash from THIS
__________________________________________________________

2nd problem is whenever i try to flash my old nand, a freeboot image or xbr i get 2 rrod. and Xellous is the only thing that will come up when and it gets that.. so if anyone can help me please post in this thread..

im not that experienced with jtags bc i didnt jtag this console my self so if you could please help me that would be great and i might give you a cash reward becuase i miss my jtag.

Your Xbox360 definitely has a overheating issue. How long does XeLLous stay on after you have turned on the console?

ive never seen it get 2 rrod when it goes into xellous..

 

[KyleT713]

0011 is the cpu overheating. if youve got your cpu key then you can get your dvd key in 360 flash tool. load your nand and then add your cpu key and itll decrypt and give the dvd key.

not sure why the 2 red lights only show when you boot xbr, freeboot or original nand. m azeem k might be able to help a bit more. im sure hell jump on and help mate.

EDIT:

there you go i knew he would lol.

i already knew the dvd key i just wanted to get that fixed thinking that might be the problem..

 

[M AzeeM K]

ive never seen it get 2 rrod when it goes into xellous..

OK. I understand it doesn't give you 2RROD immediately when you boot into XeLLous, but for how long does the console stay on after booting? Does it stay on for atleast around 10 minutes?

Also, was the console working fine with the original NAND before you tried to JTAG it?

Plus, did your original NAND dump contain any bad blocks?

By the way, what is the CB version of the original NAND?

 

[KyleT713]

OK. I understand it doesn't give you 2RROD immediately when you boot into XeLLous, but for how long does the console stay on after booting? Does it stay on for atleast around 10 minutes?

Also, was the console working fine with the original NAND before you tried to JTAG it?

Plus, did your original NAND dump contain any bad blocks?

By the way, what is the CB version of the original NAND?

it stays on for around 10 minutes.


i didnt jtag the console my friend did, but it worked before and you could do everything on the jtag fine before i got a bad keyvault.

i checked and it didnt have any bad blocks.

how do i figure how what CB version it is?


This all started when i flashed a bad keyvault it gave me no video or audio.. so then i thought it was a hardware problem so i scrapped all of the thermal paste(this might be why) then i found out that it was a bad keyvault and not the hardware so i got a nand x and tried to reflash freeboot and i got 2 rrod.. so then i just wrote xell with jtag tool and it would only boot up Xell..

 

[sick360mods]

u need thermal paste. that y u are getting 2 red lights

 

[KyleT713]

u need thermal paste. that y u are getting 2 red lights

yeah i totally forgot about me taking the thermal paste off.. i know how to put it on but should i heat it on there with a heat gun? or just let it sh*t there?

 

[M AzeeM K]

What happens after 10 minutes? Does it gives 2RROD then? Ofcourse it does. That's because you scraped off the thermal paste. You should get some new thermal paste, preferably Arctic Silver and put it on the CPU and GPU. Then try to use the Xbox360 with freeboot. I am sure it will work fine then.

You can find the CB version by opening your original NAND in 360 Flash Dump Tool 0.95

 

[KyleT713]

when i looked at my nand in 360 flash tool it had a bad key all over it and so did my backup but they both worked before.. that might be why?

 

[M AzeeM K]

when i looked at my nand in 360 flash tool it had a bad key all over it and so did my backup but they both worked before.. that might be why?

You have to put your CPU Key in 360 Flash Dump Tool. Once you add your CPU Key in the application, it will decrypt the information stored in the KV and show it instead of showing you Bad KV.

 

[KyleT713]

You have to put your CPU Key in 360 Flash Dump Tool. Once you add your CPU Key in the application, it will decrypt the information stored in the KV and show it instead of showing you Bad KV.

oh yeah i forgot about that since i havent used it in like a month and i just downloaded that..

is that what your talking about?http://gyazo.com/98c1a728dd82426f79b09dbff7055edb.png

 

[M AzeeM K]

oh yeah i forgot about that since i havent used it in like a month and i just downloaded that..

is that what your talking about?

Yes. So, you have a Xenon. Well then, you probably have an overheating issue. Replace your thermal paste with something nice such as Arctic Silver, and do the X-Clamp mod or apply an RROD kit. After you do this, your Xbox360 should work fine.

 

[KyleT713]

Yes. So, you have a Xenon. Well then, you probably have an overheating issue. Replace your thermal paste with something nice such as Arctic Silver, and do the X-Clamp mod or apply an RROD kit. After you do this, your Xbox360 should work fine.

its already got the x clamp fix..

 

[M AzeeM K]

its already got the x clamp fix..

Has it got thermal paste on the CPU and GPU or you scraped thermal paste off and left the CPU and GPU like that ?

 

[KyleT713]

i scrapped it off and left it. but should i heat it with a heat gun after or what should i do with it after i put it on?

 

[M AzeeM K]

i scrapped it off and left it. but should i heat it with a heat gun after or what should i do with it after i put it on?

Just get a nice thermal paste and spread it over the CPU and GPU uniformly making a thin coat. Then put the Heatsinks on and start using your Xbox360.